Carbon block resistivity tester

WDTCarbon block resistivity tester

WDTCarbon block resistivity testerIt is an instrument used to measure the electrical conductivity of carbon materials, block materials such as graphite, and carbon paper. This instrument is powered by a high-precision stable current source, with automatic display of current and voltage, and is stable, accurate, intuitive, and convenient. The flexible testing sample platform is suitable for testing samples of different diameters and lengths. This instrument can be used according to the standard methods of ISO 11713-2000, YS/T63.2-2005, and YS/T 64-1993Test the electrical resistivity of cathode carbon blocks, pre baked anodes, anode paste cathode paste, and carbon products at room temperature.

High precision stabilized voltage and constant current source:

Input: 220V ± 10% Power consumption: ≤ 300VA

Output: Voltage 0-24V, Current 0-5A, Accuracy 0.01

WDTTesting Platform:

1.diameter:Φ20～Φ50mm；

2.length: 80～130mm；

3. Range of sample resistivity:0.5～200.0 μ Omega.mprecision0.5%

4. Temperature range: room temperature

10. Test report: Provide sample information (roll number, batch number, status, size) and tester information input window, with automatic input of test date and time; Automatic calculation of resistivity data; The resistance temperature system automatically calculates.

11. Data retrieval: Provide a data retrieval window, which can be searched by sample: roll number and/or batch number and/or status and/or size; Can be searched by date and testing personnel; Can be searched by resistivity range and temperature coefficient of resistance range.

13. Standard sample: This equipment comes with automatic calibration (After each test with a standard sample, it can be automatically calibrated afterwards).

WDTMain configurations:

1Test host a

2Data collection system a set

3Testing software Including data communication interface a set