Capping machine

KDF8Capping machineMainly suitable for capping 50-500ml glass bottles in industries such as pharmaceuticals, food, and chemicals, it can automatically complete capping, removal, capping, and sealing. Adopting the three blade planetary rolling method for aluminum caps, it has a firm, smooth and scratch free rolling edge, high qualification rate, and is suitable for ordinary caps, aluminum-plastic caps, and spiral caps. It has the characteristics of easy disassembly of molds and product contact parts, and quick and convenient replacement and installation of molds and accessories

Main technical parameters:

■ Applicable specifications: 50-500ml A and B type large infusion bottles

■ Production capacity:~7200 bottles/hour

■ Roll cap qualification rate: ≥ 99%.

■ Electric power: 1.2kw, 380v, 50 (60) Hz

■ Machine weight: 600Kg

■. Dimensions: 3600 × 1350 × 2000 mm (length × width × height)

Capping machine

Specific operating methods
1. Place the bottle filled with liquid and capped onto the lower tray, lean against the V-shaped support block, hold the bottle with one hand, and tighten the handle downwards with the other hand. At this point, the tray lifts the bottle upwards until the cap is tightly pressed against the capping head.
2. After the bottle cap is tightly pressed against the capping head, the three continuously rotating capping blades rotate several times to tighten the bottle cap. The motor must run clockwise.
3. Push the handle forward to make the rolled lid return to its original position with the tray. The entire operation process is completed. Repeat the above operation for each bottle cap rolled in the future.

Adjustment of the capping head
This machine is equipped with multiple capping heads, which can be selected according to the size of different bottle caps. Before formal use, you can try using a bottle.
1. The lid is not tightly rolled, you can unscrew the locking nut of the lid head in a counterclockwise direction to remove the upper lid head, and then tighten the upper fixing nut.
2. The lid is rolled too tightly and there is a phenomenon of unscrewing the bottle cap. You can unscrew the locking nut of the upper rolling cover head and screw it clockwise into the upper rolling cover head, then lock the upper fixing nut.
3. The lower edge of the bottle cap cannot be tightened, and the eccentricity of the three rolling blades can be adjusted appropriately according to the actual situation. If the bottle is too tight and crushed, the eccentricity of the three rolling blades can be adjusted appropriately.