Cable Bending Tester

NegotiableUpdate on 01/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The wire swing testing machine complies with the provisions of relevant standards such as UL817 "General Safety Requirements for Flexible Wire Components and Power Cord". Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords. To test the flexural strength of plug leads and wires, the test method is to fix the sample on a fixture and apply a certain load. During the test, the fixture swings left and right, and after a certain number of times, the breakage rate is checked; Or when the power cannot be turned on, check the total number of swings, this machine can automatically count, and when the sample is bent to a broken wire and cannot be powered on, it can automatically stop the operation

Product Details

Cable Bending TesterOverview: This testing machine complies with the relevant standards such as UL817 "General Safety Requirements for Flexible Wire Components and Power Cords". Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords. To test the flexural strength of plug leads and wires, the test method is to fix the sample on a fixture and apply a certain load. During the test, the fixture swings left and right, and after a certain number of times, the breakage rate is checked; Or when the power cannot be turned on, check the total number of swings, this machine can automatically count, and when the sample is bent to a broken wire and cannot be powered on, it can automatically stop the operation

Product NameCable Bending Tester

Basic parameters:

1. Fixtures: 6 sets

2. Swing angle: 10-180 ° continuously adjustable

3. Swing speed: 10~60c. p.m adjustable

4. Automatic counters: 6 counting separately

5. Load weight: 50100200300500g

6. Volume: 86x51x81cm

7. Power supply: 220V, 50/60Hz 10A

8. Weight: 60kg

This machine is specifically designed to test the flexural strength of plug leads and wires, and can automatically count. The method is to fix the sample on a fixture and apply a certain load. During the test, the fixture swings left and right, and after a certain number of times, the breakage rate is checked; Or when it cannot be powered on, check the total number of swings. This machine can automatically count and stop the operation when the sample is bent until it breaks and cannot be powered on.