-
E-mail
zhoutao_0@163.com
-
Phone
13862066160
-
Address
No.1 Rainbow Road, Luzhi Town, Suzhou City
Product Categories
- Internal pulsation pressure comprehensive testing machine
- Horizontal insertion and extraction force, life test
- Vicat softening point tester
- Internal protection current tester
- Oxygen index tester
- Horizontal and vertical combustion testing machine
- Plug and unplug life testing machine
- Safety testing instruments
- Ball impact testing machine
- Wire tester
- Inner pot boiling water resistance weight loss tester
Wuzhong District Luzhi Xincheng Precision Electronic Instrument Business Department
Cable Bending Tester
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The plug lead bending test machine $r $n complies with the relevant standards such as UL817, GB2099, etc. "General Safety Requirements for Flexible Wire Components and Power Cord". Suitable for manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords. The $r $n machine is specifically designed to test the flexural strength of plug leads and cables; The speed of $r $n is collected by a photoelectric sensor and transmitted to a digital display meter. The value can be read by directly adjusting the stepless speed control $r $n device
Product Details
This testing machine complies with UL817，GB2099According to the relevant standards' General Safety Requirements for Flexible Wire Components and Power Cord '. Applicable to manufacturers and quality inspection departments regarding power cords DC Conduct a bending test on the wire.
This machine is specifically designed to test the flexural strength of plug leads and cables;
The speed is measured by a photoelectric sensor to collect signals and transmit them to a digital display meter for direct adjustment of stepless speed regulation
The device can read numerical values
Test method: The test method is to fix the sample on a fixture and add a certain load. The fixture swings left and right for a certain number of times, and then check its wire breakage rate. When it cannot be powered on, check the total number of times it counts and it can stop working by itself;
1. Test rate: adjustable from 10-60 times/minute
2. Bending angle: adjustable from 10 ° to 180 °
3. Workstation: Conduct 6 plug lead tests simultaneously each time
4. Bending times: 0-999999 can be preset
5. Weight of weight: 50 \ \ \ \ 100 \ \ \ \ 200 \ \ \ 300 \ \ \ 500 g 6 each
6. Volume: 85 * 60 * 75 cm
7. Weighing approximately 100 kg
