Burkert pH meter, Bodebao acidity meter

Due to limited webpage space, we are unable to display all the information about the pH meter. We can only provide a brief introduction if we cannot find what you are looking forModel or informationPlease contact the sales personnel, we sellAll products of Burkert.

On the Burkert product nameplate, in addition to the series, there are also numbers starting with 00. The number starting with 00 is the order number, and there are dozens of such order numbers for a series. Therefore, if you cannot find the order number you are looking for, it is okay to check with the sales team.

Burkert pH meter, Bodebao acidity meterProduct Introduction

The Baodi PH meter is composed of a probe 8203 type and a bracket 8200 or 8203. The common combination is the 8203 probe+8200 bracket+8619 controller. The physical picture is as follows:

There is another combination method for the Baode pH meter acidity meter, which is the 8203 probe+8202 bracket. This combination does not require the controller 8619, and most pharmaceutical factories use the 8203+8200 combination.

Burkert pH meter, Bodebao acidity meterBracket 8200 Product Introduction:

The support range of the analytical 120mm probe (pH/redox potential/conductivity) covers many different application scenarios: - general use - water treatment - food and beverage - pharmaceutical/biotechnology. The process joint has a wide range of applications and can be used for installing ordinary brackets in pipelines or containers. Sanitary bracket is used for applications with hygiene requirements: - Three bar bracket, ensuring good protection of the probe and easy cleaning. Due to the adoption of sanitary design, it can be subjected to steam disinfection, high-pressure disinfection, and CIP cleaning. -The directly welded bracket saves space and is suitable for installation in fermentation tanks and many other applications that use tanks and pipelines. Can perform steam disinfection, high-pressure disinfection CIP。 -The bracket used for 2 'clamping joints or for DN50 threaded process connections meets high requirements, such as CIP applications. The Pt1000 temperature sensor is optional. -The 15 ° specification with 2 '(DN50/40) connector, suitable for GEA Tuchenhagen VARINLINE process connection, enables the probe to be positioned according to liquid flow direction or in vertical pipelines.

1) Suitable for different types of devices and applications
2) Multiple probe supports available for selection
3) General and pharmaceutical applications, water treatment, food and beverage industries