-
E-mail
hebhongyu@163.com
-
Phone
13131796580
-
Address
No. 198, Economic and Technological Development Zone, Cangzhou City, Hebei Province
Hebei Dahong Experimental Instrument Co., Ltd
hebhongyu@163.com
13131796580
No. 198, Economic and Technological Development Zone, Cangzhou City, Hebei Province
Bread volume measuring instrumentuseMethod:
Fix the volumetric instrument on a balanced table.
The operation steps are as follows:
1、 Open the plug and adjust the zero point with filling material.
(1)The volume of bread is0~600mlPour the filling waste directly into the container at the bottom of the volumetric instrument, using a ruler
Zero point adjustment;
(2)The volume of bread is400~1000mlA standard mold with a certain volume inside(400ml)Place it in the container at the bottom of the volumetric instrument and use Adjust the zero point of ruler II. Repeat this process multiple times to ensure that the filling material is at the zero point position.
2、 Flip the instrument upside down so that all the filling material falls into the upper container of the volumetric instrument, and close the insertion plate.
3、 Open the bottom and place the bread to be tested (at this point, take out the module).
4、 Flip up the inverted instrument technique and cover the lid.
5Pull open the plug, the filling material naturally falls down, and read the scale of the filling material on the ruler, which is the measured value of the bread volume.
4 Bread volume measuring instrumentNotes:
1The volumetric instrument should be placed in a dry and clean place,useThe filling material should be checked regularly to prevent mold growth and clumping.
2Before each experiment, the zero point should be checked, and after the experiment, the debris of the tested food should be cleaned up.
inuseDuring the process, the insertion and removal of the plug-in board should be done with appropriate force to allow the filling material to fall naturally. Do not tap or collide with the instrument to avoid affecting the measurement results. For multiple high-quality products of the same type, please visit Hebei Hongyu Enterprise Networkhttp://www.hongyuyiqi.net ,*Order:
2、 What you are inquiring aboutBread volume measuring instrumentThe product is a national warranty product, and you can receive free warranty service provided by Hebei Hongyu Enterprise within the specified time, relieving your worries and allowing you to purchase with confidence.



Bread volume measuring instrument
It is a measuring instrument used to measure the volume of bread, pastries, and various irregular fixed foods.
This instrument is suitable for volumes smaller than1000The measurement of the volume value of food in milliliters is widely used in sectors such as grain and food.
II Bread volume measuring instrumentSpecifications and main technical indicators:
1、 External dimensions:850×200×130Millimeters.
Measurement range: Scale I:0~600milliliter. Ⅱ:400~1000milliliter.
2、 Filler: particle size in1~2Millimeter rapeseed.
3、 Accuracy: < ±1%.
4、 Reproducibility: < ±0.8%.
1、 Open the plug and adjust the zero point with filling material.
(1)The volume of bread is0~600mlInternally, pour the filling waste directly into the container at the bottom of the volumetric instrument using a ruler
Zero point adjustment;
(2)The volume of bread is400~1000mlA standard mold with a certain volume inside(400ml)Place it in the container at the bottom of the volumetric instrument and use Adjust the zero point of ruler II. Repeat this process multiple times to ensure that the filling material is at the zero point position.
2、 Flip the instrument upside down so that all the filling material falls into the upper container of the volumetric instrument, and close the insertion plate.
3、 Open the bottom and place the bread to be tested (at this point, take out the module).
4、 Flip up the inverted instrument and cover it with the lid.
5Pull open the plug, the filling material naturally falls down, and read the scale of the filling material on the ruler, which is the measured value of the bread volume.
4 Bread volume measuring instrumentNotes:
1The volumetric instrument should be placed in a dry and clean place,useThe filling material should be checked regularly to prevent mold growth and clumping.
2Before each experiment, the zero point should be checked, and after the experiment, the debris of the tested food should be cleaned up.