Blue M Inert Gas High Temperature Oven IGF-6680/7780/8880/9980

Advantages of Blue M Inert Gas High Temperature Oven

• The welded and sealed internal chamber eliminates the migration of smoke to the insulation material

• Prevent product oxidation

• When the airflow leaks, issue an alarm to the operator and turn off the oven heater to minimize adverse consequences

• When the door is opened, the door switch will turn off the heater and blower to ensure the safety of the operator

Characteristics of Blue M Inert Gas High Temperature Oven

• Suitable for inert gases such as argon, carbon dioxide, helium, and nitrogen

• Outdoor heavy-duty nickel chromium wire heating element

• The inner/outer shell chamber allows the air surrounding the coolant to circulate around the inert gas chamber

• Ingestion of blower motor

• There are gas flow and chamber pressure monitors and regulators on the control panel

• Large capacity horizontal airflow system

• 6-inch mineral wool insulation material

• Blue M fiberglass door sealing ring design

• 3/8-inch inlet connection

• Exhaust port and damper

• pressure relief valve

• Blow timer

• Heating enable lamp

• Models IGF 8880 and 9980 are water-cooled

Parameters of Blue M Inert Gas High Temperature Oven

• NFPA 86 Grade B Oven

• Temperature: Room temperature+15 ℃ -593 ℃ (1099 ° F)

• Uniformity: ± 2% of the set value

• Control accuracy: ± 0.5 ° C

• Resolution: ± 0.1 ° C

• Close the exhaust device and run it without load at rated voltage

Specifications

*All specifications are subject to change without prior notice.