BURKERT flowmeter 207626 in stock

BURKERT flowmeter207626 in stock

German BURKERT solenoid valve, German BURKERT angle seat valve, German BURKERT sensor

Working principle of German BURKERT solenoid valve:
The German BURKERT solenoid valve has a sealed chamber with through holes at different positions, each leading to a different oil pipe. The middle of the chamber is the valve, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, different oil discharge holes will be blocked or leaked out. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the oil pressure will push the piston of the cylinder, which in turn drives the piston rod, which drives the mechanical device to move. In this way, the mechanical motion is controlled by controlling the current of the electromagnet.

BURKERT flowmeter can save space by maintaining flow rate. It adopts a single acting pneumatic actuator with spring safety protection to operate the guide angle seat valve. When using, one should choose between normally open or normally closed.

BURKERT flow meters are widely used for short-term frequent start-up, with the characteristics of sensitive response and accurate action. When used in conjunction with solenoid valves, pneumatic control can accurately control gas and liquid flow rates. It can meet the requirements of accurate temperature control and liquid dripping.
The wet heat sterilization cabinet should use angle seat valves to control steam volume and temperature accurately.

BURKERTTechnical parameters of flowmeter:
The angle seat valve can maintain flow rate and save space. It adopts a single acting pneumatic actuator with spring safety protection to operate the guide angle seat valve. When using, one should choose between normally open or normally closed.
The product is made of stainless steel casting and polytetrafluoroethylene. Can be used for most gases and liquids. Steam and corrosive environments. It comes with a heat sink to protect the actuator. Ensure that the valve has a long lifespan.

BURKERT flowmeter 207626 in stock
Principle and technical parameters of BURKERT angle seat valve:
Single acting and double acting
Single acting (pneumatic head usually has one hole); working principle According to the function of spring reset to achieve opening and closing, it is divided into normally open and normally closed types.
Double acting (pneumatic head usually has two holes); Working principle: Control its switch by supplying air. (According to customer requirements, double acting and spring reset can also be selected for more precise control)
Folding and editing this paragraph with connection method
Pneumatic angle seat valves can be divided into:
Threaded connection
Quick installation connection
Flange connection
Welding type connection according to actuator folding edit this paragraph
Plastic actuator angle seat valve
Stainless steel actuator angle seat valve
by temperature
Room temperature type (up to 200 degrees Celsius)
High temperature type (up to 300 degrees Celsius)

Application parameters of BURKERT flowmeter:
BURKERT Corner Seat Valve 001131J 2000-A-2-20,0-EE-RG-GM85-B-D
BURKERT Corner Seat Valve 001132K 2000-A-2-32,0-EE-RG-GM87-B-F
BURKERT Corner Seat Valve 001133L 2000-A-2-40,0-EE-RG-GM88-B-F
BURKERT Corner Seat Valve 001134M 2000-A-2-50,0-EE-RG-GM89-B-G
BURKERT Corner Seat Valve 001135N 2000-A-2-13,0-EE-VA-GM84-C-D
BURKERT Corner Seat Valve 001136P 2000-A-2-20,0-EE-VA-GM85-C-D
BURKERT Corner Seat Valve 001137Q 2000-A-2-25,0-EE-VA-GM86-C-E*
BURKERT Corner Seat Valve 001138Z 2000-A-2-32,0-EE-VA-GM87-C-F
BURKERT Corner Seat Valve 001139S 2000-A-2-40,0-EE-VA-GM88-C-F
BURKERT Corner Seat Valve 001140F 2000-A-2-50,0-EE-VA-GM89-C-G
BURKERT Corner Seat Valve 001144X 2000-B-2-13,0-EE-RG-GM84-B-D
BURKERT Corner Seat Valve 001145Y 2000-B-2-20,0-EE-RG-GM85-B-D
BURKERT Corner Seat Valve 001146Z 2000-B-2-25,0-EE-RG-GM86-B-E
Pressure range: 0-2.5Mpa (i.e. PN0-PN25)
Medium temperature: -20 ℃~+200 ℃ (normal temperature type) -20 ℃~+300 ℃ (high temperature type)
Environmental temperature: -10 ℃~+60 ℃
Specification of threaded pneumatic angle seat valve: DN10-80
Quick installation pneumatic angle seat valve specification: DN15-80
Specification of flange type pneumatic angle seat valve: DN15-80
Stainless steel pneumatic threaded (internal thread) angle seat valve: DN10-65
Stainless steel pneumatic quick installation angle seat valve: DN15-65
All stainless steel pneumatic flange angle seat valve: DN15-80 Valve body material: stainless steel
Sealing material: polytetrafluoroethylene
Actuator housing: polyimide, stainless steel
Application of Pneumatic Angle Seat Valve in Daily Life:
Control gas: neutral gas, air
Control liquids: automation industrial control fluids, food grade dairy industry, domestic water, ordinary pipeline fluid media, etc.

German BURKERT flowmeter, German BURKERT analytical valve, German BURKERT control valve, our company

Nature of Business
The hydraulic components are as follows:
Electromagnetic directional valve, directional valve, one-way valve, superposition valve, overflow valve, counterbalance valve, proportional valve, manual directional valve, flow valve, pressure reducing valve,
Throttle valve, pressure control valve, back pressure valve, filling valve, splitter, shuttle valve, pressure relay, plug-in valve, air pressure valve, plunger pump,
Gear pumps, vane pumps, cycloidal hydraulic motors, oil coolers, hydraulic cylinders, etc;
The pneumatic components are as follows:
Air source processor combination, filter, pressure regulating valve, oil feeder, solenoid valve, pneumatic valve, angle seat valve, manual valve, pull valve, foot valve,
Mechanical valve, one-way valve, vacuum generator, cylinder, magnetic switch, buffer, pressure gauge, quick connector, floating connector,
Pressure gauge switch, water cooler, electrical locator, PU tube, vacuum suction cup, oil filter screen, vibrator;
The electrical components are as follows:
Relays, sensors, converters, proximity switches, encoders, programmable controllers;
The company has a large inventory and supplies regular parts in stock. For the convenience of customers in various industries, the company also distributes other accessories, with professional procurement channels and reasonable prices.
The company's products have been widely used in various fields such as industrial machinery, machine tools, plastic machines, shoe machines, brick machines, metallurgy, mining, chemical industry, papermaking, coal, ships, electricity, engineering machinery, environmental protection machinery, etc.
Our company has branches in Germany and the United States, and many European and American brands can directly purchase goods from abroad,
Short delivery time, low price, self declaration, welcome new and old customers to inquire and purchase!!
www.wisterchina。。 Com German Company
West Industrial Equipment Co., Ltd., Germany
West Industrial Equipment Co., Ltd., USA
Address: C1:200001, 27th Floor, Science and Technology Capital East Building, Beijing East Road, Huangpu District, Shanghai
Bank of Deposit: Bank of Communications Co., Ltd. Shanghai Beijing East Road Branch
Account: 3100 6640 9018 1500 759 86 Tax ID: 310 226 692 989 752

BURKERT flowmeter 207626 in stock