-
E-mail
sales@hnsheli.com
-
Phone
13524372132
-
Address
5th Floor, Building A1, Xingchang, No.1 Lantian Road, Xingsha Industrial Base, Changsha Economic and Technological Development Zone
Product Categories
- Heavy oil kinematic viscosity
- Automatic micro moisture analyzer
- Counter current viscometer
- Automatic interface tension tester
- Automatic tube bending kinematic viscometer
- Insulation oil dielectric strength tester
- Rapid viscosity analyzer
- Viscosity tester
- Kinematic viscosity meter
- Fully automatic motion viscosity meter
- other
Hunan Haoli Electronic Technology Co., Ltd
Automatic Tube Kinematic Viscometer
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The automatic flow tube viscosity meter adopts a double-layer glass cylinder for more uniform temperature. And the density meter method can be used to test the density of petroleum products, which has wide practicality.
Product Details
Automatic Tube Kinematic Viscometer
According to standards: GB/T265, GB/T11137, GB/T1884, ASTM D445, ASTM D1298
Bath volume: 20L
Automatic Tube Kinematic Viscometerworking environment
Working power supply: AC220V ± 10% 50Hz ± 10%
Environmental temperature: 10-28 ℃
Relative humidity:<80% RH
Other: There is no strong vibration, airflow, strong electromagnetic interference, or corrosive gas around the laboratory.
Features:
1. Multiple auxiliary functions. Includes: constant setting, temperature calibration, internal clock timing verification, automatic calculation of viscosity index, and automatic conversion of kinematic viscosity to Engler viscosity.
2. Dual over temperature protection for software and hardware, over temperature alarm, and anti dry burn protection function.
3. After quickly replacing the fixture, the density of petroleum products can be measured using the densitometer method.
4Using double-layer glass cylinders for more uniform temperature.
5. Using PT500 temperature sensor, the temperature of the constant temperature bath is stable and accurate, with a temperature control accuracy of 0.01 ℃.
6. The temperature rise and fall speed is fast. The maximum heating and cooling rate is 5 ℃/minute.
