Autolite Dual Platinum Spark Plug 3136 Autolite Agent

Autolite Dual Platinum Spark Plug 3136 Autolite Agent
How to use American Autolite spark plug 3136? Oil deposits on the Autolite spark plug indicate that lubricating oil has entered the combustion chamber. Deposits may sometimes adhere between the top of the insulator and the electrode of the Autolite spark plug, which can cause the engine to malfunction in severe cases. Cleaning the spark plug can provide temporary relief. In order to maintain good performance, it is necessary to identify the root cause of the malfunction. If only a few spark plugs are present, it may be due to damage to the valve stem oil seal. If the spark plugs of each cylinder are stuck with such deposits, it indicates that the cylinder is leaking oil, and the air filter and ventilation device should be checked for blockage. There are black deposits on the electrode and inside of the spark plug, indicating that the mixture is too rich. Autolite spark plugs can increase the engine running speed and last for a few minutes, burning off the black layer of coal smoke left on the electrode. The replacement of spark plugs should be based on the structural and performance characteristics of the engine, especially the model specified in the engine manual. If there is severe carbon buildup in the Autolite spark plug during use, a spark plug with a higher calorific value should be selected; If the engine has a hot ignition phenomenon, a spark plug with a lower calorific value should be selected.
Autolite spark plug technology: Sparks are generated through the discharge phenomenon between electrodes. Gasoline engines generate power through the timely combustion of fuel and mixed gas. However, gasoline, as fuel, is difficult to self ignite even in high temperature environments. To ignite it in a timely manner, it is necessary to use "fire" to ignite it. The spark ignition referred to here is the function of the "spark plug". The overall performance of an Autolite spark plug engine depends on the quality of the spark produced by the spark plug. We often compare the engine to the 'heart of the car', but we can better compare the Autolite spark plug to the 'heart of the engine'. But if the anti-inflammatory effect of the electrode is greater than that of the flame core, the flame core will disappear and cause flameout (referring to the effect of the electrode absorbing heat to eliminate the flame).
The high voltage generated by the ignition device is applied between the center electrode and the ground electrode of the Autolite spark plug, which breaks the insulation state between the electrodes and generates current, resulting in the discharge of electric sparks The spark energy determines whether the compressed mixture can ignite and explode. The discharge phenomenon is completed in a very short time (about one thousandth of a second) and is extremely complex. US pure import 3136; The function of the Autolite spark plug is to generate strong sparks between the electrodes within a specified time, which becomes the starting point of the combustion of the mixture. The ignition of Autolite spark plugs caused by electric sparks is activated by spark discharge between electrodes, resulting in chemical reactions (acidity) and thermal effects, forming flame nuclei. The heat energy of the Autolite spark plug activates the surrounding mixture, forming a flame core that expands outward from its own combustion center.
Product range:
Autolite dual platinum spark plugs from the United States Autolite
Platinum spark plugs, Autolite copper spark plugs, Autolite high thread spark plugs, Autolite luminous spark plugs, Autolite racing spark plugs, Autolite small engine spark plugs
Copper glass sealed insulator, with the center electrode of the terminal post together; Ensure all required voltages at the spark gap; Airtight seal (100% leak proof)
Multi rib insulation reduces the risk of flash evaporation
The integrated terminal increases strength
Resistors reduce radio frequency interference (RFI) and electrode corrosion
Cold formed steel shell precision rolling thread
All copper core electrodes can provide better performance under all conditions
Spark plugs must repeatedly withstand severe hot/cold cycles
When starting a cold engine, the spark plug clearly has the same temperature as the ambient air
Under high load operating conditions, the temperature of the combustion gas inside the combustion chamber can reach 3000oC
The birth of Autolite in the United States began in 1911, when two small companies began producing car lights and became a thriving automotive parts manufacturer in the 1930s. Its history as a spark plug manufacturer began in 1935. Today, the American Autolite brand continues to develop, providing high-quality ignition products for the automotive aftermarket and OEM, including spark plugs, ignition wire sleeves, and coil plugs. *Process control and automated testing help ensure that Autolite products meet strict internal and customer requirements.
The birth of Autolite in the United States began in 1911
In the 1930s, when two small companies began producing car lights, it became a prosperous manufacturer of automotive parts. The history of being a spark plug manufacturer began in 1935, when Royce G. Martin, the president of Electric Autolite Company, equipped a laboratory to develop * Autolite spark plugs. The * * * of this project is Robert Twells, a ceramic engineer who has been passionate about researching current and ceramic insulator technologies and gradually began providing spark plugs and other ignition components for automotive * * * including Chrysler, Studebaker, Packard, and Willys. Today, the American Autolite brand continues to develop, providing high-quality ignition products for the automotive aftermarket and OEM, including spark plugs, ignition wire sleeves, and coil plugs. *Process control and automated testing help ensure that Autolite products meet strict internal and customer requirements.
Autolite Dual Platinum Spark Plug 3136 Autolite Agent
The necessary performance of Autolite spark plugs: heat resistance: can adapt to extremely hot and extremely cold situations; The temperature inside the spark plug reaches 2000 ℃ during the combustion of the mixed gas, and the low-temperature gas is cooled during the suction stroke, causing the rapid heating and cooling phenomenon of the 4-stroke engine to turn the 2-turn engine into one turn during operation. Autolite spark plugs have the same heat resistance as this, but also require heat release that does not reach the starting point of surface ignition. Autolite spark plug mechanical strength: can adapt to intense pressure changes; During the inhalation process, it can reach a gas pressure below 1, and during the explosion process, it can reach a gas pressure above 45. *Mechanical strength that can adapt to such intense pressure changes. Autolite spark plugs can maintain sufficient insulation for high voltage requirements of approximately 10-30kV under rapid temperature and pressure changes.