Welcome Customer !

Membership

Help

Shanghai Hujing Medical Equipment Co., Ltd
Custom manufacturer

Main Products:

mechb2b>Products

Aerosol generator heat generation

NegotiableUpdate on 03/05
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Brief description: TDA-5B aerosol generator thermal power generation: The suspended particle generator is designed with excellent performance and convenient operation for operators It is an ideal tool for demonstrating or testing HEPA high-efficiency filtration systems. It needs to be installed in an airflow system with a range of 500 to 65000 cubic feet per minute, along with an inert gas source and a 120/240 volt, 750 watt power supply environment.
Product Details
brand Other brands Price range discuss personally
Instrument type aerosol generator Origin category domestic
application area Medical and health, environmental protection, food, and biotechnology industries

TDA-5B Aerosol Generator
TDA-5BSuspended particle generator
TDA-5BAerosol generator heat generation Product Features
1,1Wide range of airflow(500-65,000CFM)
1.2 Adjustable dust concentration(0-100Microgram per liter)
1.3 Large capacity dust generation(Continuous without filling4Hour detection)
2. Product Application:
2.1 Cleanroom
2.2 HEPAfilter
2.3 HVACsystem
2.4 ULPAfilter
2.5 operating room
2.6 Nuclear filtration system
2.7 research and development
TDA-5BAerosol generator heat generation Product Introduction:
TDA-5BThe suspended particle generator is designed with excellent performance and convenient operation for operators.It is an ideal argument or testHEPATools for efficient filtration systems. It needs to be installed within the airflow range500arrive65,000A cubic foot per minute airflow system and an inert gas source120/240Fu750The electricity supply environment of Wa.
TDA-5BIt has control and display functions on the front panel. This is a large capacity suspended particle generator that can operate4Hours do not require refilling. Its digital temperature control allows the operator to set the temperature in the most suitable environmentUsed for suspended particles.
TDA-5BThe principle of producing air suspended particles with consistent size distribution is to add a certain amount of suspended particle source liquid in a large thermal range. After the liquid is evaporated and recombined, it is only5Under the pressure of pounds, a small amount of inert gas is sent out to form air suspended particles with various diameters.TDAUnder the effect of generating suspended particles, andTDA-2GperhapsTDA-2HWhen used in conjunction with a photometer, it can provide sufficient suspended particles to measure the filtration system (flow range from500-65,000Cubic feet/Minutes) or concentration less than100Microgram/Increasing the sensitivity of the photometer can also be used to test its leakage when rising.
When verifying cleanrooms, testing efficient filtration systems, or individual filtration devices,TDA-5BIt's your best choice.
TDA-5BAerosol generator heat generation Technical Parameter:
Output range of airborne suspended particles: 500 - 65,000cubic feet per minute
Suspended particle concentration: 100Microgram/Ascending in6,500Cubic feet per minute flow rate
Suspended particle concentration: 10Microgram/Ascending in65,000Cubic feet per minute flow rate
Generation type:heating chamber
compressed air:NOT REQUIRED
compressed gas(inert gas): 20Cubic feet/Hour in50psiPressure
Gas Type:Particles of various diameters(cold)
size: (35cm L 25cm W 25cm H)
weight: 9.1 KG
power supply: 110 VAC / 60 Hzperhaps220 VAC / 50hz