Acid base concentration meter sensor (electrode)

Acid alkali concentration sensorelectrodedetailed introduction

Acid alkali concentration sensorelectrodeInstallation method: a) Conventional installation is flow type, equipped with a flow pool. The lower end of the flow pool is the inlet and the upper end is the outlet. It is connected to the site with a ￠ 10 hose, and the top is screwed into the electrode core; b) Plug in installation, with 3/4 external thread at the rear end of the electrode core, can be configured with a connecting rod for connection; C) Pipeline installation, directly screw the electrode core into the on-site pipeline.

Acid base concentration meter sensor (electrode)Used for monitoring HCI, NaOH, H2SO4, etc., measurement range: 0-10%. Can be used in conjunction with the SJG-2030 acid-base concentration meter or SJG-2032B acid-base concentration meter produced by Kelan Company. Material: The electrode core is made of platinum, as shown in the figure on the right, and the outer shell of the flow cell is made of polymer, as shown in the figure on the left. It is corrosion-resistant; Screw the electrode core into the flow cell, and the factory standard length of the electrode cable is 8 meters.

Shanghai Kelan Instrument Technology Co., LtdDeveloped and produced:
Acid base concentration meter sensor (electrode)Used for monitoring acid-base concentrations such as HCI, NaOH, and H2SO4, the electrode is made of corrosion-resistant materials, lightweight, small in size, based on conductivity measurement principle, with a measurement range of 0-10%. Can be used in conjunction with the SJG-2030 acid-base concentration meter or SJG-2032B acid-base concentration meter produced by Kelan Company. It can also be used on acid-base concentration meters produced by multiple domestic manufacturers. Welcome new and old customers to make purchases, please contact customer service.