9SGC-7D1SY transmitter

<p font-size:13px; '='' style='word-wrap: break-word; margin: 5px 0px; font-family: &quot; sans serif&quot; , tahoma, verdana, helvetica; font-size: 12px; The 9SGC-7D1SY transmitter uses high-quality pressure sensors for reliable operation, stable performance, easy installation and use, small size, light weight, and high cost-effectiveness. It can be widely used in various positive and negative pressure measurements. Imported diffused silicon or ceramic core is used as the pressure detection element, and the sensor signal is converted into a unified output signal of 0-10mA or 4-20mA through a high-performance electronic amplifier. It can replace traditional remote transmitters, Hall elements, differential transmitters, and has the performance of DDZ-II and DDZ-III transmitters. It can be used in conjunction with various types of dynamic coil indicators, digital transmitters, electronic potentiometers, as well as with various automatic adjustment systems or computer systems.

Maintenance and upkeep of immersion level gauge:
1) Clean once a month.
2) When cleaning, first open the screw cap of the iron pipe of the immersion water level gauge and carefully take out the level gauge; Remove any debris (such as aquatic plants, plankton, etc.) attached to the liquid level gauge.
3) When cleaning the pressure hole of the water level gauge, trichloroethylene or alcohol can be injected into the pressure hole to soak it at half its height for about 5 minutes, then gently shake and repeat multiple times until it is cleaned. Do not use any tools to clean the pressure hole to avoid damaging the sensitive core pressure film.
4) When cleaning the pressure interface and pressure hole of the transmitter, avoid using brushes or metal tools with excessive hardness to avoid damaging the sensitive core and pressure interface threads.
5) After cleaning, slowly place the liquid level gauge back into the iron pipe, feeling that it has been placed in the lower part of the iron pipe. Install the rotary cap back to its original position. After removal and cleaning, reinstallation may result in some changes in installation depth. Therefore, it is necessary to refer to the water level gauge at the same water level in the water gate again to correct the detection values of the secondary instrument, in order to ensure the correctness of the sampling data.