86 type 3A access control touch switch power supply

1、 Product Introduction: This product is designed to be beautiful and convenient, easy to install, reduces wiring, uses intelligent power chips, and is manufactured using professional production processes. The product meets the certification standards. Tested for electromagnetic interference, short circuit, overvoltage, overcurrent protection, etc. Has passed the EU quality system certification.

Scope of application: This product is suitable for building intercoms, various access control machines, various electric locks, monitoring probes, etc.

3： Product parameters:

1. Communication input: AC110V-240V50/60HZ

2. DC output: DC12/3A

3. Equipped with NO/NC/COM ports, it can easily access various types of electric locks.

4. It has a delay adjustment function, which can be adjusted freely between 0 and 15 seconds.

4 Wiring instructions:

1. NO often starts

2. NC normally closed end

3. COM public end

4.+12V output

5. GND negative output

6. PUSH1 negative unlock signal, can be connected to the exit switch and door lock unlock signal

5、 Touch switch instructions

1. The touch switch is a capacitive touch screen

2. When the touch switch is powered on normally, it indicates a red backlight, and when it is touched to open the door, it changes to a green backlight

Special reminder: Due to the self checking function of the touch chip, do not install it with a dot, and install it in a standardized manner. Avoid routing under the touch area. To avoid false self check caused by touch, which may result in touch misoperation, it is necessary to install it before powering on