induction heater

• Working voltage:220V AC，50 / 60Hz, three-phase（380VACThree phase, can be provided upon request)

• Working current:5~52 Amps(Required)60AAir switch)

• * High input power:15 KW

• Output frequency:30-80 kHz

• Duty cycle:80％

Induction coil:220mm（ID）x 65mm（H）

• Air cooling: rear fan

• Protection: Automatic water pressure, overheating, and overload protection

• Refractory components: The complete refractory device is made of alumina, including the support at the bottom of the crucible, crucible support, and lid

Temperature controller and thermocouple

• Equipped with automaticPIDPrecision digital temperature controller with adjustable function

• Customizable30Step up and down temperature program.

Overheating and thermocouple fault protection.

•Temperature control accuracy:±3℃

• Thermocouple:CType,outside diameterØ1/4', Long10'

• Continuous operating temperature range:1000℃~1900℃

• * High operating temperature:2000℃ (less than one hour)

•*High heating rate:4℃/s（1000℃-1200℃）The3℃/s（1200℃-1500℃）The1℃/s-2℃/s（1500℃-2000℃）

Graphite crucible and refractory materials

• High purity graphite crucible:114 mm O.D x 100 mm ID x 142mm HUsed for induction heating. *Large capacity:The volume occupied by the sample should be equal to the volume of the graphite crucible1/2.

• * Large melting volume:4Kilogram iron (tested)

The three-layer specially designed refractory lining can withstand up to2200The temperature is ℃.

• Attention: Graphite crucibles are consumables, please use them inCYKYOrder spare parts

FLANGE&Quartz cavity

• Includes an open-ended quartz tube with dimensions of216 mm(OD) x 208 mm(ID) x 500mm(L)，

• Top flange: with1/4Stainless steel interface for inch thermocouple armor, needle valve and barb jointArticulated flange.

• Bottom flange: with needle valve andKF-25Stainless steel flange for vacuum interface.

• IncludingKF25Right angle valves and clamps1000mmLongSSBellows, used to connect vacuum pumps

Anti corrosion vacuum gauge

• When the air pressure is10mbarWhen it comes to the above, there is no need to convert coefficients based on the type of gas being measured, and the range can be up to3.8x10E-5 torr

• One24V，1AThe DC adapter is included and can be used directly. The input voltage of the adapter is110-240V, single-phase

flowmeter

Compact direct reading flowmeter,100-1000 cc / minWith1 / 4NPT

• Accuracy:4％

• Optional: Precision mass flow meters can be provided upon request, but additional fees are required

water chiller

• Temperature range:5-30℃

• Water flow rate:58 L / m，

• Attention: It is recommended to use a specific coolant for optimal performance.

vacuum pump

• Includes one unit156 L / mThe rotary vane vacuum pump

• Speed:156 L / min, * High vacuum degree10E-2 torr.

• * High power consumption:0.4KW / 0.37KW

If a high-speed turbo pump is chosen, the vacuum degree can reach10E-5 torr

Mobile furnace rack

• Structure: Steel frame structure

•600mm（L）x 800mm（W）The mobile furnace frame facilitates the movement of electric induction heaters and quartz tubes with flanges

shield

• For nonULThe certified version will provide a protective cover made of phenolic board.

• ForULThe certified version will provide a transparent protective cover made of polycarbonate.

A protective cover should be placed around the quartz tube to accommodate glass fragments in case of an accident.

Warranty period

One year warranty period, lifetime maintenance

• Excluding consumables: furnace tubes, refractory materials, sealing rings, graphite crucibles, and induction rings

net weight

158kg