120 ℃ water transport mold temperature machine

120 ℃ water transport mold temperature machine


Basic Configuration

Appearance and structure of the body

The surface coating adopts powder baking technology

The structure adopts cold plate processing and high-strength welding technology

Internal structural components

The pipeline is connected using industrial seamless steel pipes

The heating and melting device is processed and formed from industrial steel

The heating element is made of high-quality tungsten wire material

No need to install heat exchanger, using direct cooling

Adopting mechanical sealed vortex pump

Filters can be installed on pipelines for thermal circulation media, cooling, and water supply

Electrical appliances and controls

Microcomputer integrated machine control

The operation and alarm actions are displayed directly in text

The pump control adopts high-performance German Siemens and French Schneider brand heating control, and the wires of the high-performance German Siemens and French Schneider brand heaters use high-temperature resistant wires

The control valve body adopts the brand

Adopting a split type control box to ensure stable electrical operation and extend service life

Purchase accessories

Intelligent remote control system with WIFI (optional)

Controller with touch function (optional)

The cooling valve can choose pneumatic control (optional)

Distilled water tank setting (optional)

Features of this device:
1. Air blowing and return function.
2. Explosion proof device for pipelines.
3. Control mode: touch screen/PID.
4. Isolated electrical control box, high temperature resistant and flame-retardant wires.
5. Automatic exhaust upon startup, overheating alarm, overheating trip.
6304 stainless steel integrated pipeline, 316 stainless steel heating pipe.
7. Electrical brands: Schneider, Omron, Mingwei.
8. Multi segment temperature display: set temperature, actual temperature, and return water temperature.
9. RS485 communication function for automated management (optional)
10. Internally made of stainless steel, high voltage explosion-proof;
11. The exterior design is aesthetically pleasing and easy to disassemble, making maintenance convenient.

Parameters of 120 ℃ water transport mold temperature machine:

The high-temperature water returning from the mold is pumped back to the mold temperature machine through a pipeline, pressurized by a pump, and then transported to the heater. It is then heated by an electric heating tube and sent to the mold, circulating in this way. During this process, if the temperature of the high-temperature water is too high, the system will activate the solenoid valve, and the cooling water will enter the system to directly cool the high-temperature water, reducing its temperature and achieving the goal of constant temperature. If the temperature of the high-temperature water is too high and still maintained at the set temperature of the RGO (Over Temperature Protector), the system will activate a high-temperature alarm and stop working; If the cooling water pressure does not meet the set requirements, the pressure switch sends a low pressure signal, and the system starts a low pressure alarm and stops working.