*Spot DCT1158W plug-in ultrasonic flowmeter

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The DCT1158W series products consist of two parts: transmitters and sensors. Inserting sensors can be installed online under pressure, with stable installation and no need to stop production on site. Especially suitable for flow measurement of single liquid media containing small amounts of particles and bubbles. This ultrasonic flowmeter adopts a modular integrated design with independent menu operation and LCD backlight display. The protection level of the product transmitter reaches IP65, and the protection level of the sensor reaches IP68, suitable for use in harsh environments such as humidity and immersion.

Product Details

Data on DCT1158W Plug in Ultrasonic Flow Meter

(The price is a reference price, details with the seller)

Introduction to DCT1158W Plug in Ultrasonic Flow Meter

The DCT1158W series product is a widely used, multifunctional, plug-in, time difference ultrasonic flowmeter. It has a very simple installation method and can achieve "online pressurized" installation without the need to stop production on site, making it easy for customers to measure pipeline flow. It adopts digital correlation technology and intelligent adaptive sound wave technology, making its measurement stability more prominent. At the same time, the sound focusing technology used significantly enhances the signal reception quality of the product during continuous measurement.

feature

*Online pressurized installation

*Calibration and maintenance on-site do not require production stoppage

*Positive and negative flow measurement, cumulative flow

**50000 working hours for testing

*The lifespan of keyboard keys is over 200000 times

Applicable fluids

Suitable for measuring fluids in water and liquids without large amounts of impurities, particles, suspended solids, or bubbles, and with full tubes.

Widely applicable, all sound conducting liquids can be measured.

Applicable pipes

Carbon steel, stainless steel, PVC

application

Suitable for tap water, sewage treatment, seawater desalination, pure/ultrapure water, industrial circulating water, and cooling water.

Calibration detection

Axial flow dual circuit flow calibration device

Technical data
Flow rate: 0~± 5m/s
Accuracy: ± 1% of the measured value
Repeatability: 0.2%
Display: 20 × 2 characters
Power supply: 10~36VDC or 10~24VAC, maximum 1A
Shell material: PC/ABS plastic
Protection level: IP65
Environmental temperature: -10 ℃~50 ℃

Relative humidity: 0~99%, no condensation

Analog output: 4-20mA output, maximum load 750 Ω
Communication: RS-485 communication interface, supporting Modbus protocol