How to use dumpling skin machine

1. Place the machine on a compacted ground and connect it to a 220V power supply Install residual current circuit breaker. And connect the ground wire.

2. Before starting up, check whether the bolts in each part are loose. Start the motor to idle for one minute. Once confirmed to be correct, immediately put it into production

3. Noodle making: Both handmade and noodle making machines are available. (A small amount of salt should be added to the water) Be careful not to make it too soft, and the ratio of surface to water should be 1:0.35-0.43

4. Before starting up, fill the powder hopper with dry flour and put the mixed flour into the hopper The placement should not be interrupted.

5. Adjust the skin thickness after starting the machine. After the dough is normal, adjust the mold roller to achieve moderate pressure Transport the waste leather from the conveyor belt to the hopper After the adjustment is completed, the nut should be tightened.

6. The surface from the machine head to the conveyor belt should enter the chess set flat Otherwise, it will stick to the mold

7. When producing noodles, use a cutting tool to press the noodles Install it in front of the machine. The tool must be installed to the bottom and locked tightly. Then catch the chain to start production Remove it when not in production

8. The adjustment of the machine can be made according to the subsequent adjustments. Dumpling skin machine

Precautions for dumpling skin machine:

1. The feeding into the hopper must not have intermittent gaps to ensure the normal operation of the machine, otherwise the pressed dough will be unqualified.

2. The dry flour in the powder hopper must not be interrupted Will there be adhesion on the lateral skin.

3. Regularly open the gearbox and add lubricating oil Chains and sprockets should be regularly lubricated.

4. After the machine is shut down, it should be cleaned and maintained to ensure its normal use.

5. It is strictly prohibited to put hands into the machine head or mold to avoid accidents.

6. The installation of the noodle press tool must be locked tightly.

7. When disassembling and assembling the noodle press mold, the power must be unplugged to avoid accidents.