Rotary magnetic stirrerEquipped with independent magnetic stirring and electric stirring functions, the speed is stable, noiseless, and continuously adjustable. The mixer and mixing rod have corrosion resistance. Equipped with a constant temperature heating device, the temperature can be selected according to work requirements. The rotational torque of its electric motor is driven by the attraction of the active and passive magnets to drive the blades to work and operate. This instrument is easy to operate and convenient to work, and is a routine product of various universities, research institutions, and laboratories.

Can set temperature and temperature display, can be used for heating, and the digital display is intuitive and accurate. A stirrer made of refined polytetrafluoroethylene and magnetic steel, which is resistant to high temperature, wear, chemical corrosion, and has strong magnetic properties. Mixing work can be carried out in a sealed container, making it ideal and convenient to use.

After using the principles of magnetic field and vortex to place the liquid into the container, the stirrer is simultaneously placed into the liquid. When the base generates a magnetic field, it drives the stirrer to move in a circular motion to achieve the purpose of stirring the liquid. By using a temperature control device, the sample temperature can be controlled and maintained according to specific experimental requirements, helping experimenters set experimental conditions and increasing the possibility of experimental reproducibility.

　　Rotary magnetic stirrerIt should be kept clean and dry. It is strictly prohibited for the solution to flow into the machine to avoid damaging it. When not working, the power should be cut off.

When the stirrer jumps or does not stir during stirring, please cut off the power and check whether the bottom of the beaker is flat and the position is correct. At the same time, please measure it. The current voltage used is between 220V ± 10V, otherwise the above situation will occur.

The heating time should generally not be too long, intermittent use can prolong the service life, and heating should not be done when not stirring.

Medium speed operation can work continuously for 8 hours, high-speed operation can work continuously for 4 hours, and prevent severe vibration during operation.

The power socket should use a three hole safety socket and must be properly grounded.