Inverter aging roomIt is a device designed to simulate high temperature and harsh environmental testing for high-performance electronic products. It is an important experimental equipment for improving product stability and reliability, and an important production process for various manufacturing enterprises to improve product quality and competitiveness. This device is widely used in fields such as power electronics, computers, communications, biopharmaceuticals, and chemical raw materials.
The temperature control of the inverter aging room is accurate and precise. Due to the adoption of *'s air duct system design and electrical control system, the temperature uniformity of the entire room can be maintained, which is significantly higher than similar products.
The room has a wide temperature range and can be continuously adjusted. It can be set arbitrarily within the range of room temperature+5 ℃ -60 ℃ (room temperature+5 ℃ -85 ℃). The system protection function ensures safe and stable operation.
The laboratory structure design is reasonable, and the supporting products and functional components have the same level as peers, which can adapt to the production needs of stability, safety, and reliability. It can meet the processing and production requirements of users for the above-mentioned purposes, with convenient use, operation, and maintenance, long service life, beautiful appearance, and a good user interface, making user operation and monitoring simpler and more intuitive.
The wind duct system of the inverter aging room complies with the GB standard of "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering", and usually consists of a circulation system, a heating system, and an over temperature exhaust system. The circulation system, over temperature exhaust system, heating system, and supporting air duct system are installed inside or on top of the aging room. The heating system is heated by an electric heater and surrounded by fire-resistant insulation materials. Using PID temperature module control, after the temperature reaches the required temperature of the product, the power of the heater is automatically adjusted according to the fluctuation of indoor temperature, in combination with the insulation performance of the insulation board, to stabilize the indoor temperature at the set temperature value. The room temperature can be increased to the set temperature within a certain time. When the temperature rises to the set value, the heater stops heating The heater has an overheat protection device. If the customer's own product generates heat, an overheat exhaust system is used. If the heat generation is small, an electric louver automatic negative pressure exhaust is used. If the heat generation is large, a low-noise fan is used for exhaust, and the speed is controlled by a frequency converter.