High temperature mold temperature machineStructural characteristics:
1. Water or medium oil can be chosen as the heat transfer medium as needed.
2. Choose a temperature controller equipped with PID intelligent automatic calculation, which can accurately display and control the temperature difference of the mold within ± 1 ℃ of the required temperature.
3. The two-stage heating structure design allows for the adjustment of power according to the required temperature, and is combined with a special heating structure to save time and electricity.
4. Various thoughtful protective devices, such as fuse free switches, automatic warning systems for water or oil shortage, abnormal temperature, and pump overload, can automatically cut off the circuit to ensure safety.
Characteristics of high-temperature mold temperature machine:
A. Improve molding efficiency:
Before molding, CBE automatically controls the mold temperature to quickly reach the desired temperature and maintain a constant temperature, reducing the time required for mold preheating.
2. Sustainable operation without worrying about excessively high mold temperature, and downtime during the process does not require waiting for the mold temperature to decrease, thus improving production efficiency.
B. Improve product quality:
1. Plastic has physical properties of thermal expansion and contraction, so if the mold temperature is unstable or not controlled properly, it can generate phenomena such as water streaks, shrinkage, distortion, deformation, and poor surface gloss of the product. However, using TMC models can solve such problems.
2. It can promote the mold to maintain an appropriate temperature, significantly reduce the number of molds and decrease the defect rate of molded products, ensuring product quality.
Does the alarm sound due to incorrect phase sequence connection of the three-phase power line of the high-temperature mold temperature machine, or is it caused by a fault in the reverse protector?
1. If the phase sequence of the three-phase power line is connected incorrectly, simply adjust the phase sequence
2. If the reverse protector malfunctions, simply replace it with a new one. I don't know which brand was originally on the machine, but here you are using Swiss Jiale, which has good quality.