In summer, the weather is too hot and there is a lot of rain, which can easily cause the packaging machine to get damp and rust. So, how should we maintain the fully automatic peanut oil filling machine in summer? 1. The fully automatic filling machine should be used in a dry and clean indoor environment, and should not be used in places containing acids or other corrosive gases to the body. 2. Regularly inspect parts and electrical components, once a week, to check whether the bolts, bearings, and other moving parts on the lubrication block are rotating flexibly and worn. If defects are found, they should be repaired in a timely manner and not forced to be used. 3. When refueling the packaging machine, do not let the oil overflow beyond the cup, let alone flow around the machine and on the ground. Because oil can easily contaminate materials and affect product quality. 4. After the machine is used up or stopped, all components should be cleaned and no residual oil or dust should be left. 5. If the machine is not in use for a long time, the entire body of the fully automatic quantitative filling machine must be wiped clean, and the smooth surface of the parts must be coated with anti rust oil and covered with a cloth canopy. The fully automatic filling machine is highly praised by enterprises for its high cost-effectiveness. If you want to better extend the service life of the fully automatic quantitative liquid filling machine, you must use it in this special season.