Stainless steel built-in cutting type sewage elevatorWhen the water level in the bioreactor reaches a high level, the lift pump stops running and the water purification and environmental protection equipment is rented out. When the water level drops to a low level, the lift pump automatically starts, fully automatic safe water production, and automatic shutdown when the water is full;

1. The flocculation and sedimentation effects ensure that the effluent quality remains in good condition.
2. The low self consumption rate of water is about<5%, which plays a positive role in saving limited water resources.
3. It has a small footprint and can save less than 50% of the land compared to general water purification structures. It is about 4.40 meters high and can be installed outdoors.
4. Coagulation reaction function: In the design, the differences in water quality in different regions were fully considered. While selecting the appropriate dosing points, the coagulation reaction function was added to ensure that the device has sufficient coagulation reaction time. And design the surface load conservatively to make the equipment more capable of withstanding impact loads and more suitable for different water quality situations in different regions. The filtration system adopts low resistance water distribution for deep slow filtration to ensure that the turbidity of the filtered water is ≤ 3 degrees.
5. The entire system is designed with prominent features of convenience, practicality, and simple operation. It cleverly utilizes hydraulic characteristics to achieve automatic operation, with low requirements for the quality of operators. The general public can operate it freely and can automatically control the operation characteristics of the equipment. When the surface of the filter layer is blocked to a certain extent, it will automatically backwash. The entire device has no operating components, and equipment failures are almost zero. It operates reliably and is easy to maintain.
6. Easy installation and use: The main equipment is a steel structure, which is made into finished products in the factory, transported to the site for installation and commissioning, and can be put into use with a fast construction period. Items that are not convenient for transportation can be manufactured on-site.
7. Automatically turn on and off the dosing pump, and adjust the dosing amount as needed.
8. Automatically run membrane cleaning and disinfection programs.
9. The motor is equipped with overcurrent and overload protection.
10. The rapid sludge concentration chamber and adjustable automatic sludge discharge system can ensure timely removal of excess sludge impurities, thereby ensuring a stable removal rate of impurity particles.

1. One pure water machine can provide multiple drinking points for convenient drinking;
2. Appearance, intelligent model design, automatic detection of component failures, and lifespan reminder alarms;
3. The filter element is replaceable, with low operating costs and benefits from a one-time purchase;
4. The entire process of membrane bioreactor adopts an automatic control system, greatly reducing the operating and management costs.
5. Automatically turn on and off the circulating pump based on the water level in the reclaimed water storage tank.
6. The integrated filtration system adopts a pull-out design, which improves service efficiency by 90% and solves the problems of large footprint and loose structure in traditional cabinet water treatment. Reverse osmosis purification technology is used to remove harmful substances in water and ensure water safety and health;
7. Food grade sanitary materials, eliminate secondary pollution, and ensure that the water quality meets the "Sanitary Standards for Drinking Water Quality";
8. In addition to the management of the primary pump room and dosing system, the water purification device itself meets the requirements of automatic operation through a series of operating procedures such as reaction, flocculation, sedimentation, sludge collection, sludge discharge, water collection, water distribution, filtration, backwashing, and sewage discharge. The on duty personnel only need to perform regular water quality monitoring and measurement work, and do not need to manage the operation of the water purification device.
9. A high concentration flocculation layer can provide sufficient collision contact and adsorption probability for impurity particles in raw water, thus adapting to various water temperatures and turbidity of raw water, and achieving high removal rate of impurity particles. Under certain usage conditions, it also has the function of removing algae.
Stainless steel built-in cutting type sewage elevator