1. Mass flow meters have the advantages of high sensitivity, good repeatability, wide range ratio, and high accuracy. They have been widely used in natural gas trade settlement measurement and even as standard instruments for value transmission.

2. Sanitary quality flow meters can simultaneously measure multiple variables (mass flow rate, volume flow rate, temperature, density) during the measurement process. There are integrated and separated structural designs to meet different on-site installation needs.

3. The balanced dual measuring tube measurement system effectively reduces the interference of external installation stress and vibration. A high-performance signal processing circuit based on microprocessors, with higher measurement efficiency. The sensor's design with no movable parts and unobstructed flow detection ensures the longevity of the flowmeter.

IIEmerson Sanitary Quality Flow MeterMeasurement principle:

1. The structure is a double bent pipe structure, and its measurement principle is to detect the mass flow rate in the pipeline by measuring the action on the double bent pipe. In the industrial production process.

2. Sometimes it is necessary to measure the mass flow rate of fluids, such as material balance, heat balance, and batching in chemical reactions, all of which require measuring the mass flow rate of fluids. Mass flow rate refers to the mass of fluid flowing through a closed pipeline section per unit time.

3、 Structure composition of sanitary quality flowmeter:

1. A flowmeter consists of three parts: a sensor, a transmitter, and a digital indicator accumulator. The sensor consists of three parts: sensing tube, electromagnetic driver, and electromagnetic detector.

2. The electromagnetic driver causes the sensor to vibrate at its natural frequency, and the introduction of flow into the sensor produces a distortion, resulting in a phase difference on its left and right sides, which is proportional to the mass flow rate.

3. The electromagnetic monitor converts the phase difference into a corresponding level signal and sends it to the transmitter for electrical processing such as filtering, integration, and amplification. Convert into two forms of output: a standard analog signal proportional to quality and a frequency signal within a certain range.

Summary:Emerson Sanitary Quality Flow MeterThat's all for the characteristics and measurement principles of the product. After reading this article, you should have a basic understanding and knowledge. I believe everyone understands now! Overall, I hope it is helpful to everyone.