Fuqi brandDesktop electric blast furnaceInnovative design and stable performance. It has the advantages of beautiful appearance, reasonable structure, easy operation, constant temperature control, fast heating, and fuel and electricity saving. It can perform cooking tasks such as boiling, frying, and constant temperature, making it an ideal kitchen assistant and fast food utensil for you.

2、 Structural and performance characteristics of desktop electric blast furnace:

1. The DF seriesDesktop electric blast furnaceThere are two types of electric frying furnace: single cylinder electric frying furnace and double cylinder electric frying furnace. The double cylinder electric frying furnace model can fry two kinds of food with different flavors at the same time to avoid the mutual influence of their taste.

2Desktop electric blast furnaceEquipped with a constant temperature controller for setting the desired frying temperature, adjustable. At the same time, it is equipped with power indicator and heating indicator lights for easy observation of heating conditions.

3Desktop electric blast furnaceInstall a limited temperature safety protection device that can automatically cut off the power supply when the oil temperature exceeds the limit temperature, providing over temperature protection (manual reset).

4Desktop electric blast furnaceEquipped with a micro limit switch, when the electrical box is lifted, the micro switch will immediately activate to disconnect the power supply, ensuring personal safety and preventing dry burning of the electric heating tube.

5Desktop electric blast furnaceA frying basket with a foldable and detachable handle. Cooperate with a stainless steel movable oil pan with oil level markings. Easy to operate, clean, transport and store.

6Desktop electric blast furnaceThe electric heating tube is equipped with a protective plate and can be easily removed from the bottom box slot along with the entire electrical box, separated from the oil cylinder * for easy cleaning of the electric heating tube and oil cylinder.

3、 Basic parameters of desktop electric blast furnace:

name	Desktop electric blast furnace(Single cylinder)	Desktop electric blast furnace (double cylinder)
model	DF-6L	DF-6L-2
Operating voltage	~230V、50HZ	~230V、50HZ
power	2500W	2X2500W
Number of oil cylinders	1	2
Cylinder dimensions	240X300X150	240X300X150
Normal oil volume	6（L）	2X6（L）
Number of exploded baskets	1	2
Explosion basket size	185X210X115	185X210X115
Oil temperature setting range	60℃～190℃	60℃～190℃
Temperature limiter operating temperature	230℃	230℃
Manually reset temperature	<150℃	<150℃
Overall dimensions	265X430X290	550X430X290
Total weight	Kg	Kg

4、 Operating instructions for desktop electric blast furnace:

1．Check if the power supply installation is normal, and ensure that the power supply voltage is consistent with the furnace voltage.

2．The oil level line is engraved on the inner wall of the oil cylinder and should be maintained during useDesktop electric blast furnaceThe amount of oil in the cylinder. The maximum oil volume is outside the "H" mark, and the minimum oil volume is indicated at the "L" mark. It can be used to fill the oil volume according to actual needs during use.

3．Plug in the plug, connect the power, the green indicator light will turn on, and the current has been supplied to this furnace. Rotate the temperature controller clockwise to align the desired temperature scale value with the red dot position. At this point, the yellow indicator light will turn on and the green indicator light will turn off, indicating that the electric heating tube has started working,Desktop electric blast furnaceThe oil inside the cylinder is starting to heat up.

4．whenDesktop electric blast furnaceWhen the oil temperature rises to the set temperature, the thermostat can automatically cut off the power supply, and the yellow indicator light will turn off, the green indicator light will turn on, and the electric heating tube will stop working. When the oil temperature slightly drops, the thermostat can automatically turn on the power, the yellow indicator light is on, the green indicator light is off, the electric heating tube resumes working, and the oil temperature rises. Repeat this process repeatedly to ensure that the oil temperature remains constant within the set temperature range.

5. Desktop electric blast furnaceThe cylinder head is designed to maintain the cleanliness and insulation of the oil cylinder. When covering, attention should be paid to ensuring that there is no water on the cover to prevent water droplets from falling into the cylinder and causing injury from splashing hot oil.

6. Desktop electric blast furnaceComes with a frying basket for frying smaller food items. There are hooks and handles on the basket. When operating, immerse the basket in oil. After frying, lift the frying basket and hang it in the slot above the front of the oil cylinder to filter out the remaining oil. If frying large food, it can be directly put into the oil cylinder for frying.

7．Work completed, please rotate the thermostat counterclockwise to the designated position and cut off the power to ensure safety.

8．Need to be clearedDesktop electric blast furnaceWhen using old oil in the cylinder, wait until the oil temperature drops to room temperature before proceeding. Firstly, cut off the power supply, then remove the oil separator from the cylinder, and then extract the electrical box from the slot at the back of the bottom box. At this time, the electric heating tube is separated from the cylinder body along with the electrical box and placed in a clean place, making it easy to remove the oil cylinder for cleaning.

9．To ensure the safety and durability of the stove, users should regularly clean the residue in the oil cylinder and the dirt on the electric heating tube. To keep the oil cylinder and electric heating tube in a clean state.

10．The oil baffle inside the oil cylinder is installed to protect the electric heating tube. When frying food, the oil baffle must be placed inside the oil cylinder.

11．Install a temperature limiter inside the electrical box, with an operating temperature of 23 degrees Celsius0 ℃, manual reset temperature<170 ℃, and an "overheat reset protection button" is installed below the outside of the box. When the temperature exceeds the limit, the protection key acts to provide protection. When reusing, the protection button should be pressed to reset before normal use.

12．There is also a micro limit switch installed inside the electrical box. When the electrical box is inserted into the bottom box slot, electricity enters the electrical box, while lifting the electrical box out of the bottom box slot disconnects the power supply.

13．New vegetable oil (or puff pastry oil) should be used instead of old oil to avoid lowering the flash point and excessive boiling.

5、 Precautions for installation of desktop electric blast furnace:

1．Desktop electric blast furnaceThe voltage used must be consistent with the supply voltage.

2. Users need to install suitable power switches and circuit breakers near the blast furnace.

3. There is a copper equipotential grounding bolt below the rear of the box, which should be no less than 1.5mm in size2Copper core wires are reliably connected to ground wires that comply with safety regulations

Before use, check whether the wiring is loose, whether the voltage is normal, and whether the safety grounding is reliably connected

5. When installing and cleaning the furnace body, it is forbidden to directly flush the electrical box with water (or water column)

6. The installation of this stove should be operated by professional technicians

Warning!

●When installing and using, hands should be dry, and plugs and switches should be kept in dry contact.

●There is a risk of fire if the fuel level is below the low level. It is necessary to maintain a small fuel level and it is strictly prohibited to dry burn the electric heating tube.

●It is strictly prohibited to directly rinse the electrical box with water or immerse the electrical box in water for cleaning.

●Using old oil will lower the flash point and easily cause excessive boiling

●Fried food that is too wet and overloaded at once can have adverse consequences

VIGeneral troubleshooting:

Fault phenomenon	reason	exclusion method
1. Plug in the plug, connect the power, but the power indicator light does not light up or heat up	1. The plug is not properly inserted 2. The microswitch has poor contact and is not powered on	1. Improve the plug and reinsert it 2. Adjust the limit distance of the micro switch
2. The heating indicator light is not on, but the oil temperature is not rise	1Loose or detached wiring of electric heating tube 2The electric heating tube has been burnt out	1Tighten the connecting wires and screws at both ends of the electric heating tube 2Replace the heating tube
3. The power indicator light is on, set the oil Is the temperature rising or not	1. The thermostat has burned out	1. Replace the thermostat
4. The oil temperature control is normal, but the indicator light is not on	1. The indicator light is burnt out	1. Replace the indicator light
5. After circulating high temperature, the electric heating tube no longer heats up	1. Temperature limiting protector action	1. Manual reset "overheat reset protection button"
6. Oil temperature rise cannot be controlled	1. The temperature limiter is out of control	1. Replace the temperature limiter

The above fault items are for reference only. If a fault occurs, it should be immediately stopped and professional technicians should be notified to inspect and repair it as soon as possible!