1、 Warning:

1. This product must be safely grounded before use.

2. Do not use a water spray pipe for cleaning!

2、 Installation precautions and usage environment:
1. This product should be placed in a stable place, with a distance of at least 10cm from non combustible materials on the left and right sides, and a distance of at least 20cm from non combustible materials (such as brick walls) on the back.
2. The power supply voltage used for this device must match the power supply voltage on the product nameplate.
3. Users need to install suitable power switches, fuses, and leakage protectors near the equipment. No debris should be piled up in front of the switches for easy operation.
4. This device must be safely grounded before use!
Before starting up, check whether the electrical components of the product are firmly connected and whether the safety grounding is reliable.
6. When replacing the power cord, choose the same type of cable and have a professional replace it.
7. The electrical connection installation and maintenance of this product should be carried out by personnel holding an operating certificate.
1、 Operation method:
1. Add water to the tank to 2/3 of its capacity, and dry burning of the heating tube is strictly prohibited! Connect the product power supply.
2. The temperature controller is located in front of the product, with three temperature controllers that control the temperature of each cylinder separately.
3. Connect the power supply, the power indicator light will turn on, rotate the temperature controller clockwise to align the desired temperature value with the desired temperature position, and the yellow indicator light will turn on. At this time, the current has been supplied to the furnace, and the heating tube will start working. When the temperature rises to the desired temperature, the temperature controller can automatically cut off the power supply, and the yellow indicator light will turn off, and the heating tube will stop working. When the temperature slightly drops, the thermostat can automatically turn on the power, the yellow indicator light is on, the electric heating tube resumes heating, and the temperature rises. This cycle is repeated to ensure that the temperature remains constant within the set range.
4. According to the production of different specifications of food, adjust the required temperature and place the noodles or other food that needs to be cooked in a sieve to achieve the desired food effect.
After use, turn the temperature control switch to 0 ℃ and turn off the main power switch.
If any abnormal phenomenon occurs during use, it must be stopped immediately. After inspection and troubleshooting, it can be continued to be used.
3、 Cleaning and maintenance:
During cleaning and maintenance, the power should be cut off to prevent accidents from occurring.
2. After finishing work every day, a wet towel without corrosive cleaning agents can be used to clean the surface of the furnace body and the surface of the power outlet. It is strictly prohibited to rinse directly with water to avoid damaging the electrical performance.