High temperature graphite electric heating plateNo pores, wear-resistant and resistant to chemical corrosion, easy to clean, high thermal conductivity, good uniformity, can withstand thermal shock and drastic temperature changes of 700 ℃, can meet the dual requirements of rapid heating and safety considerations in the laboratory. The knob timing function sets the working time and the actual working time is displayed on the large screen LCD, and the working status is clear at a glance. It can be timed from 0-1800s. The control method adopts a separate design, and personnel should stay away from acid mist when operating the controller, which is safe and easy to operate. After determining the circuit structure, the circuit analysis method is the same as that of ordinary full wave rectification circuits, except that two sets of full wave rectification circuits with different polarities need to be analyzed separately. If the working principle of full wave rectification circuits has been mastered, only the composition of the two sets of full wave rectification circuits needs to be determined, without the need for specific circuit analysis.

Plays a leading role in the circuit, converting alternating current into direct current that can be directly used by electrical appliances. Qiangyuanxin regards the product quality of rectifier bridges as the top priority for the survival of the enterprise, and does not prioritize product quality in the development of the enterprise. Among its many partners, even if a customer uses a component that costs only a few cents, Qiangyuanxin always implements location-based tracking services if any quality problems occur. Transfer energy indoors in this way. In addition, it also generates heat itself. As a planar heating material, it forms a large thermal conductive surface with the heated object, resulting in low thermal resistance. Therefore, heat can pass through itHigh temperature graphite electric heating plateQuickly transmit to the heated object. The air molecules near the surface of the hot radiator absorb heat, increase in temperature, and enhance their motion. Under the action of buoyancy, they flow towards the upper part of space, thereby driving cold air towards the radiator. The cold and hot air flows back and forth in this way, causing the air temperature in the activity area of the room to eventually reach the required level.

The precautions for high-temperature graphite electric heating plates are as follows:

1. Do not forcefully pull the power cord;

2. The power connection should be well waterproofed and insulated;

3. Remember that the surface of the radiator must not be covered with any objects;

4. The product is different from market carbon crystal heaters. Graphene wall heaters use integral injection polyurethane foam technology, without glue, screws, rivets, etc., ensuring safety performance;

5. When using in a humid environment, please make sure to connect the ground wire. Heating in water may cause the backing paper to peel off and the image to peel off, but it can still be used normally, and the bathroom can be used normally;

6. During the overall foaming process, a small amount of gas residue may remain in the product, causing it to expand and swell when heated, which has no impact on product quality and heating effect;

7. If you encounter any problems, please contact the dealer immediately for handling and do not disassemble it by yourself.