-
E-mail
wgp@czkhyq.cn
-
Phone
13861071298
-
Address
No. 28-2, Phoenix Economic Industrial Park, Jintan District, Changzhou City, Jiangsu Province
Changzhou Kaihang Instrument Co., Ltd
What are the details to pay attention to when using a separatory funnel oscillator?
Date: 2022-04-11Read: 0
Separatory funnel oscillatorIt is designed to improve the efficiency of extraction and purification, with adjustable oscillation frequency, long timing time, and multiple sample racks, which can greatly improve the efficiency of extraction and purification and reduce work intensity. The product is easy to operate and install, and can meet the needs of various types of laboratory extraction and purification. useSeparatory funnel oscillatorThe details to be noted are:
1When using, be sure to connect the ground wire properly and place the speed control knob in a small position.
2Using at medium speed within the speed range of the equipment can extend the service life of the instrument.
3It should be placed on a sturdy workbench, with a clean and tidy environment, moderate temperature, and good ventilation.
4When installing test bottles on a vertical workbench, heavy test bottles should be avoided from being placed at both ends of the workbench. The culture medium of each bottle should be roughly equal. If there are not enough culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty space.
5Connect the external power supply, place the power switch in the "on" position, the indicator light will turn on, slowly adjust the speed control knob to the desired speed.
6After use, natural wear and tear of the instrument is a normal phenomenon. If abnormal noise is found in the motor after one year of use;The bearings in the transmission part are worn, and the belt is loose or cracked;Failure of electronic control components.
7During continuous operation, the instrument should undergo regular inspections every three months:Check for water droplets, dirt, etc. that have fallen onto the motor and control elements;Check fuses, control components, and fastening screws.
8After using this machine, the power should be turned off, placed in a dry and ventilated place, and kept clean.
