ZN-T desktop full function dimming UV aging box

NegotiableUpdate on 02/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ZN-T desktop fully functional dimming UV aging box product usage: This product uses fluorescent UV lamps as the light source, simulates the UV radiation in natural sunlight, and conducts accelerated weather resistance tests on materials and products to obtain results of aging resistance changes. Widely applicable to non-metallic materials, organic materials (such as coatings, paints, rubber, plastics, and their products);

Product Details

ZN-T desktop full function dimming UV aging box

Product Usage: This product uses a fluorescent ultraviolet lamp as the light source. By simulating the ultraviolet radiation in natural sunlight, accelerated weather resistance tests are conducted on materials and products to obtain results of aging resistance changes. Widely applicable to non-metallic materials, organic materials (such as coatings, paints, rubber, plastics, and their products);

1、 Main technical parameters

Product Model	ZN-T	ZN-TX
Internal dimensions D × W × Hmm	450×1170×500	450×550×500
Dimensions D × W × Hmm	600×1350×700	600×850×700
Device Function	Simulate temperature and lighting、Humidity, spray, radiometer
Temperature range (under illumination)	RT+10℃～70℃
temperature fluctuation	≤±0.5℃
Temperature Uniformity	≤±2℃
Center spacing of lamp tubes	70mm
Distance between sample holder and lamp surface	Adjustable up and down from 100 to 350mm
Tube power	40W per unit
irradiance	0.5~1.0W/m2 (adjustable)
Lamp wavelength	340nm 313nm（选配）
Lamp Quantity	4 pieces
Spray setting	When to spray and how long to spray, can be freely set
Lamp length	1200mm	600mm
Time setting range	0-9999 hours
Power requirements	AC220V/50HZ
reference standard	GB16776-2005 Aging Test Standard GB/T16422.1-2006 Plastics Laboratory Light Source Exposure Test Method Part 3: Fluorescent UV Lamp GB/T16422.3-2014 Plastics Laboratory Light Source Exposure Test Method Part 3: Fluorescent UV Lamp GB/T14522-2008 Test Method for Artificial Climate Aging of Plastics, Coatings, and Rubber Materials for Mechanical Industry Products - Fluorescent Ultraviolet Lamp GB/T16585-1996 Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent UV Lamp) GB/T18244-2000 Aging Test Chamber for Building Waterproof Materials GB/T 23987-2009 Artificial climate aging of paints and clear coatings Exposure to fluorescent ultraviolet radiation and water

ZN-T desktop full function dimming UV aging box

2、 Light source:
1. The light source adopts four UV series fluorescent tubes with a rated power of 40W as the light source, which are distributed in parallel at the top of the test box;
2. The standard lamp has UVA-340 or UVB-313 light sources for users to choose from and configure; (Choose one)
The emission spectrum energy of UVA-340 lamps is mainly concentrated between 315nm and 400nm wavelengths;
The emission spectrum energy of UVB-313 lamp mainly concentrates between 280nm and 315nm wavelengths;

4、 Control system:
1. The temperature control instrument adopts a "7.0-inch" large screen LCD display programmable microcomputer PID control SSR output operation, with a large LCD touch screen image, simple screen operation, and easy program editing;

2. Lighting, condensation, and spraying can be independently controlled or alternately controlled in a cyclic manner;
3. The independent control time and alternating cycle control time for lighting and condensation can be set arbitrarily within one thousand hours;
4. Using black aluminum plate to connect the temperature sensor;
5. Non Lipu ballast and starter (ensuring that the UV lamp can be lit up every time it is turned on);

3、 Operation precautions
1. Due to the strong harm of ultraviolet radiation to personnel (especially eyes), operators should try to minimize exposure to ultraviolet radiation (exposure time should be less than 1 minute). It is recommended that operators wear protective goggles and sheaths.
2. During the experimental phase, the time for opening the box door should be minimized as much as possible.
3. The sensing devices in the studio should not be subjected to strong impacts.
4. After a long period of disuse, if it is necessary to use it again, the power supply and all components must be carefully checked to ensure accuracy before restarting the equipment.

Service commitment: Free home delivery. After the installation and debugging of the UV weather resistance tester is completed, relevant technical personnel will receive free operation training at the user's site, with no limit on the number of people.