The vibrating fluidized bed dryer is driven by a vibration motor to generate excitation force, which causes the machine to vibrate. The material jumps forward in the given direction under the action of the excitation force. At the same time, the hot air input from the bottom of the bed makes the material in a fluidized state, and the material particles fully contact the hot air, thus achieving the ideal drying effect.


Product Features：

The vibration source is driven by a vibration motor, which runs smoothly, is easy to maintain, has low noise, and has a long service life.
Fluidization is uniform, without dead gaps or blowing through phenomena, which can obtain uniform drying and cooling products.
Good adjustability and wide adaptability. The thickness of the material layer, the speed of movement inside the machine, and the full amplitude can be infinitely adjusted.
Has minimal damage to the surface of the material and can be used for drying fragile materials; Irregular material particles do not affect the working effect.
Adopting a fully enclosed structure effectively prevents cross infection between materials and air, ensuring a clean working environment.
High mechanical and thermal efficiency, good energy-saving effect, and can save 30-60% energy compared to general drying devices.


Application scope：

Suitable for drying, cooling, and other operations of powdered and granular materials in industries such as chemical, pharmaceutical, food, dehydrated vegetables, grains, and minerals. Such as citric acid, saccharin, borax, ammonium sulfate, compound fertilizer, shredded radish, soybean meal, distiller's grains, seeds, slag, sugar, etc.


Specification:

1. The working amplitude is 0-3.2mm
2. The working frequency difference is ± 0.3HZ
3. Host noise: When the fluidized bed distribution plate is less than or equal to 2.7m2, the noise is not greater than 80dB; when it is greater than 2.7m2, the noise is not greater than 85dB
4. Surface temperature rise of the motor: When the main engine runs at idle for 4 hours, it should not exceed 60 ℃
5. Drying strength: For quartz sand with a particle size of 1.6-3.5mm, the drying strength shall not be less than 40kgH2O/h m2 when tested under specified conditions

Technical Parameter：