XGB-10C Touch Screen Pipe Hydrostatic Testing Machine

This series of pipe hydrostatic testing machines is manufactured according to the requirements of GB/T6111-2003 "Test Method for Internal Pressure Resistance of Thermoplastic Pipes for Fluid Transport" and GB/T15560-1995 "Hydraulic Instantaneous Burst and Pressure Resistance Test Method for Plastic Pipes for Fluid Transport". It is used to determine the pressure resistance failure time or instantaneous burst pressure value of thermoplastic pipes and composite pipes (such as PP-R, PP-B, PP-A, PE, PE-X, PVC, PVC-U, PVC-C and aluminum-plastic composite pipes) under long-term constant internal pressure and constant temperature. It is a testing equipment for plastic pipe manufacturers and testing institutions.

This testing machine meets the following national standards simultaneously

GB/T18742.1-2002 "Polypropylene for hot and cold water use - Part 2: Pipes"

GB/T18742.2-2002 "Polypropylene for hot and cold water use - Part 2: Pipes"

GB/T18742.3-2002 "Polypropylene for hot and cold water use - Part 3: Pipe fittings"

GB/T13663-2000 "Polyethylene PE Pipe Materials for Water Supply"

GB/T15558.1-2003 "Polyethylene PE Pipe Materials for Gas Underground Use"

GB/T15558.2-1995 "Polyethylene PE Pipe Components for Gas Underground Use"

GB/T18992.1—2003

Cross linked polyethylene (PE-X) piping systems for hot and cold water - Part 1: General principles

GB/T18992.2—2003

Cross linked polyethylene (PE-X) piping systems for hot and cold water - Part 2: Pipes

GB/T10002.1-1996 "Polyvinyl chloride (PVC-U) pipes for water supply"

GB/T10002.2-1996 "Polyvinyl chloride (PVC-U) fittings for water supply"

GB/T18993.1—2003

Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 1: General principles

GB/T18993.2—2003

Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 2: Pipes

GB/T18992.1—2003

Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 3: Pipe fittings

GB/T18997.1—2003

Aluminum plastic composite pressure pipe Part: Aluminum tube lap welded aluminum-plastic pipe

GB/T18997.2—2003

Aluminum plastic composite pressure pipes Part 2: Aluminum tube butt welded aluminum-plastic pipes

2、 Characteristics

This machine is pressurized by airless hydraulic (water as the medium) system, which is safe and reliable. Its key components are high-precision accessories imported from abroad and domestic products. The high-pressure pump head is Italian three plunger 15MPa high-pressure pump head, and the electrical control system is controlled by Taiwan, China's original PLC (micro programmable controller),

PLC cluster control is an intelligent unmanned monitoring instrument that enables the PLC controller to continuously transmit control information to various executing components, and each executing component continuously feeds back the test results to the PLC controller, thereby achieving instruction and execution. The information between execution and instruction is transmitted to each other, achieving the function of human-machine interface dialogue. The pressure sampling response time of the pressure sensor is 10 milliseconds, which improves the overall signal response speed, control accuracy, and long-term reliability. And it can achieve independent control of test pressure and test time for each channel. When one channel of the sample completes the test, the sample breaks or leaks, it does not affect the continuation of other channels of the test. Therefore, it can simultaneously perform multiple pipe tests of different specifications, models and materials;

3、 Main technical parameters

Three independent control test pressure and test time

Pressure range: 0-10.00MPa

Main pressure system high working pressure 12.00MPa

High pressure plunger pump

(1) Pressure: 10MPa

(2) Flow rate: 8.3-11L/min

(3) Speed: 700rpm

(4) Three plunger diameter: 12mm

Pressure control accuracy:+2% of the upper limit of the test pressure value, -1% of the lower limit of the test pressure value

Pressure value resolution: 0.001MPa

Pressure sensor: Test pressure sampling response time of 10 milliseconds

Timing range: 0-9999h

Timing accuracy: 1%

Host power (note: excluding media box): 1.5kW

Power supply: 380V AC

Host dimensions: length x width x height 600mm x 650mm x 1800mm