XDGM-20 anti-corrosion diaphragm vacuum pump

XDGM-20 anti-corrosion diaphragmA vacuum pump is designed based on the principle of a positive displacement pump. It is powered by an electric motorWhen the driving connecting rod performs up and down reciprocating motion, it drives the diaphragm to open and close, causing a change in the volume inside the diaphragm chamber and a change in the pressure of the medium, achievingInhalation and excretion.

Core Technology:

*Corrosion resistance of PTFE composite membrane *;

*Improve fatigue resistance and effectively extend the service life of the membrane; There is no oil mist pollution problem;

*Compared with rubber diaphragms, it has higher air tightness, corrosion resistance, and strength;

Main features and advantages:

1) Resistant to strong chemical corrosion; 2) Pollution free and maintenance free;

3) Low noise and low vibration; 4) Overheating protection;

Widely used:

1) Rotating evaporation; 2) Vacuum drying; 3) Vacuum distillation;

4) Solid phase extraction; 5) Vacuum drying; 6) Vacuum concentration, etc.

Shanghai Xiande Anti corrosionDiaphragm Vacuum PumpXDGM-20 corrosion-resistant

Diaphragm Vacuum PumpProduct Technical Parameters:

Precautions for anti-corrosion diaphragm vacuum pump:

1. Temperature limit: Pay attention to whether the working temperature of the medium is within the allowable range of the pump. High temperature media may affect the sealing performance and material stability of the pump.

2. Leak protection: Ensure the installation of leak detectors or safety valves to prevent excessive pressure inside the pump, and provide leak detection and alarms.

3. Personal safety: When operating the anti-corrosion diaphragm vacuum pump, please wear appropriate personal protective equipment such as goggles, gloves, and clothing to prevent contact with harmful media.

4. Determine the normal operating status of the pump: Pay attention to monitoring the operating status of the pump, such as abnormal noise, vibration, or temperature. If any abnormalities are found, the machine should be stopped immediately and the cause of the malfunction should be checked.

5. Follow the operating procedures: Strictly follow the manufacturer's operating manual and safety guidelines to correctly operate and use the anti-corrosion diaphragm vacuum pump.

6. Maintenance: Regular maintenance should be carried out to clean the diaphragm and pump body and prevent the accumulation of corrosive substances. Check for diaphragm wear, leakage, or abnormal conditions, and replace it promptly.

Please note that the above are only general suggestions. Specific operations and precautions should be based on the actual situation and equipment requirements.