XD-52AA New XD-52 Rotary Evaporator Series

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: XD-52 rotary evaporator series XD-52AA new rotary evaporator operation process: 1. Vacuumize and turn on the vacuum pump. If the vacuum cannot be applied, check whether the bottle openings are sealed properly, whether the vacuum pump itself is leaking, whether the sealing ring at the shaft is intact, and connect a vacuum switch in series with an external vacuum tube to improve the recovery rate and evaporation speed; 2. Add materials; 3. Heating; 4. Rotation; 5. Connect; 6. Recover the solvent.

Product Details

XD-52 Rotary Evaporator SeriesXD-52AA NewRotary evaporatoroperating procedure

1. Vacuum pumping

After turning on the vacuum pump, if it is found that the vacuum cannot be applied, it is necessary to check whether the bottle openings are sealed properly, whether the vacuum pump itself is leaking, whether the sealing ring at the shaft is intact, and whether a vacuum switch is connected in series with the external vacuum tube to improve the recovery rate and evaporation speed.

2. Adding ingredients

By utilizing the vacuum negative pressure of the system, liquid material can be sucked into the rotary bottle through a hose at the feeding port, and the liquid material should not exceed half of the rotary bottle. This instrument can continuously add materials. When adding materials, please pay attention to 1. Turn off the vacuum pump 2. Stop heating 3. After evaporation stops, slowly open the pipe plug to prevent backflow.

3. Heating

This instrument is equipped with a specially designed water bath, which must be powered on after adding water. The temperature control scale is 0-99 ℃ for reference. Due to the existence of thermal inertia, the actual water temperature is about 2 degrees higher than the set temperature. The set value can be adjusted during use, for example, if you need a water temperature of 1/3-1/2. Remove the power plug after use.

4. Rotation

Turn on the switch of the electrical control box and adjust the rotary knob * evaporation speed. Pay attention to avoiding water bath vibrations and fluctuations.

5. Connect

Connect the cooling water.

6. Recovery of solvent

Turn off the vacuum pump, turn on the feeding switch to release air, and remove the solvent from the collection bottle

XD-52 Rotary Evaporator SeriesProduct Features:

◆Ball milling condenser tube, fast cooling recovery, quick installation and disassembly.

◆The manual and automatic dual-purpose lifting function is easy to operate.

◆Temperature and speed are displayed on the same screen.

◆Sealing components: Made of fluorine glue and double PTEF imported materials combined with glass shaft, it does not fall off and is wear-resistant, extending its service life.

◆One time molded 4L PTFE composite pot, corrosion-resistant, fast heating, easy to clean.

◆The main metal parts are made of stainless steel and rust proof aluminum alloy, with a compact structure, high precision, and durability.

◆Integrated control panel, stable speed, precise temperature.

◆Feeder: Valve type feeding pipe sleeve connected to PTFE pipe and water blocking ring.

◆The equipment is equipped with protective covers (insulation, energy-saving, splash proof, explosion-proof).

Equipment technical parameters:

model	XD-52AA
host	Manual and automatic dual-use up and down lifting 0-150mm, more convenient to operate
speed	Digital display speed, knob type stepless speed regulation 0-150 revolutions per minute;
Heating pot	One time molding 4L PTFE composite pot with a diameter of 22 × 11.5cm, corrosion-resistant, fast heating, and easy cleaning
temperature	Automatic temperature control, digital display water bath: room temperature -99 degrees ± 1 ℃
cooler	Vertical, ball milled condenser tube for easy disassembly and fast cooling speed
feeder	Valve type feeding pipe sleeve with PTFE pipe and water blocking ring
sealing component	Tightly integrate polytetrafluoroethylene vacuum sealing gasket with glass conduit
Range of sample bottle capacity	0.25--2L
heating power	1kw
working power supply	AC～220v/50Hz
Volume/Weight	Outsourcing dimensions (length x width x height): 56.5 x 48 x 54cm 22kg
Instrument size	(Length x Width x Height) 69 x 38 x 98cm
factory default configuration	Collect 500ml each for the S35 ball mill mouth and 250ml each for the 24 # rotary (eggplant shaped) bottle

Circulating water vacuum pump SHZ-III

Specification Model	Performance of the equipment					Local functions				Exterior dimensions Length x Width x Height (mm)	Whole machine weight Kg
	power	working power supply	traffic	head	Body material	大真空度	Single head suction volume	Number of exhaust heads	Storage tank capacity
	W	V/HZ	L/min	M		Mpa	L/min	a	L
SHZ-III	180	～220/50	60	8	Anti corrosion engineering plastics	0.098	10	2	15	400280420	10.5

XD-52旋转蒸发器系列