Wireless ranging base station HXZK-CJ

Wireless pulse ranging base stations can be used for long-distance mutual distance measurement, for crane positioning, bucket wheel positioning and distance measurement, and for distance measurement and positioning of rail equipment to achieve collision avoidance and automation control.

Distance measurement principleAs shown in the figure below, at T1 time, a distance measurement request pulse will be initiated from the base station to the host station. At T2 time, the distance measurement request pulse will arrive at the host base station to complete a distance measurement. The flight time of the pulse between the master and slave base stations is the result of subtracting T1 from T2. Given that the speed of the pulse is approximately equal to the speed of light C, the distance between the master and slave base stations D=C * (T2-T1) can be obtained.

Source of ranging error：According to the principle of distance measurement, the distance between the master and slave base stations is D=C * (T2-T1), where C is a fixed value. The main cause of D error is flight time error. If there are obstacles between the master and slave base stations, the time difference will increase, leading to distance measurement error. The obstruction mentioned here should mainly avoid metal, solid walls, human bodies, and other obstructions, which can lead to increased ranging errors. Due to the use of ultra wideband pulses for ranging, their diffraction ability is poor. If there is close range obstruction between antennas, it will inevitably lead to increased distance errors.

Product Features

• Industrial grade design, supporting 24-hour * 365 day continuous use;

• IP67 protection level, waterproof and dustproof, suitable for various harsh indoor and outdoor environments;

• Accurate distance measurement, 10 centimeter level real-time precise distance measurement, no cumulative error, no need for calibration;

• Ultra long distance, supporting real-time ranging for distances greater than 500 meters;

• Supports RS485 output;

• Support DC12-24V wide voltage power supply;

• The ranging accuracy is not affected by dust, rain and fog;

• Quick installation, simple, convenient, and fast;

• Support one to many real-time distance measurement.

Ranging mode: One to many ranging mode can achieve ranging from one base station to multiple base stations, and the distance between the main base station and each slave base station will be output from the main base station.The many to many ranging mode will enable multiple host stations to measure distance from multiple slave base stations, and output the distance from the master base station to the slave base station.

Schematic diagram of one-to-one measurement data output at a distance of 217.77 meters (data is the actual usage environment data of directional antennas)

Schematic diagram of distance measurement data output

Equipment power supply

Equipment installation precautions

• The installation height of the equipment shall not be less than 1 meter;

• Equipment installation can be fixed using screws or clamps;

• Ensure that the master and slave base stations, especially the antennas, can see each other clearly;

• There should be no obstruction between base stations, especially between antennas.

Equipment parameters

Installation method

Application Cases