What should we do if the air is dry? Industrial humidifier

Detailed introduction of industrial humidifiers: In autumn and winter, when the air is dry, it is a troublesome time for many production enterprises. Because at this time, due to the dry air, it is difficult to eliminate dust, static electricity, and so on. Dust and static electricity have a significant impact on industrial production, leading to a decrease in product quality, affecting machine operation, and even causing safety issues if not handled properly. So how should we deal with the situation of dry air? It is recommended to use an industrial humidifier for specialized selection. It sprays mist like water into the air to increase humidity, which can eliminate static electricity and dust.

Zhengdao ZS series ultrasonic industrial humidifier manufacturer: Zhengdao motor, product advantages, differences and comparisons, beware of counterfeiting!

Zhengdao Electric solemnly promises: the whole machine is guaranteed for one year,Improve the after-sales service systemOur corporate mission is to uphold quality and integrity.

Welcome to the detailed information of your industrial humidifier! There are many types of industrial humidifiers, and the prices and application ranges of different brands of industrial humidifiers may vary. However, we will provide you with * after-sales service and high-quality solutions.

Zhengdao ZS-40Z and ZS series industrial humidifier control mode, technical parameters:

The six core configuration advantages of Zhengdao ZS-40Z and ZS series industrial humidifiers are:

	Advantage 1: [All stainless steel box body] The unit adopts a fully stainless steel box structure, treated with spray coating, which is beautiful and durable; Automatic water inlet, equipped with overflow protection, can automatically control the water level; The bottom is equipped with universal wheels that can move freely.		Advantage 2:Integrated atomizer The unit adopts an integrated ultrasonic tempered steel movement, with a built-in water shortage protection device, no mechanical drive, no noise, high atomization efficiency, and eliminates problems such as easy blockage and complicated maintenance.
	Advantage 3:IP68 waterproof power supply The unit adopts * fully sealed waterproof variable frequency power supply and fully sealed integrated circuit, with a waterproof rating of IP68 (can be placed underwater at a depth of 1 meter without short circuit).		Advantage 4:Bearing type waterproof fan The pneumatic device of the unit adopts a ball bearing 36V waterproof fan with a waterproof rating of IP68, which has fast start-up, high air volume, low vibration, corrosion resistance, and stable operation.
	Advantage 5:Alkali resistant acid ceramic atomizing sheet The ceramic atomizing plate selected by the unit is suitable for use in environments with hard water quality and alkali and acid resistance, and has a normal service life of up to 3000-5000 hours. It is easy and fast to replace.		Advantage 6:High precision humidity sensor The unit is equipped with a microcomputer automatic control machine and a high-precision humidity sensor from Japan's Shenrong, a fully automatic control panel, a human-machine dialogue interface, and intelligent touch sensitive button operation.

You may also be interested in the following content ..

1. Industrial wet film humidifier (QS-9)
2. Industrial mobile humidifier (CS-20Z)
3. Industrial Large Humidifier (ZS-F60Z)
4. Industrial Small Humidifier (SJ-J3000)

Industrial production is really a troublesome thing. It doesn't work if the air is too humid or too dry. Both too humid and too dry can have an impact on industrial production. Fortunately, with the advancement of industrial technology, machines are available to meet production needs regardless of whether the air is dry or humid. Core Tip: The above information about industrial humidifiers is all that Zhengdao Motor has provided for you. We will provide you with the most valuable reference suggestions. Welcome!

You can learn more detailed information about industrial humidifiers here:

Excavators have always been regarded as the "crown jewel" of construction machinery and a barometer of the industry. According to data statistics, 29 excavator manufacturers in the Chinese construction machinery market sold a total of 58056 crawler excavators and 840 wheeled excavators from January to June 2014. Among them, 43214 excavators weighing over 6 tons were sold, a decrease of 12.3% compared to the same period in 2013; 14842 excavators weighing less than 6 tons (including 6 tons) were sold, a decrease of 3.6% compared to the same period in 2013, with a relatively small decline.

　　
From the data of tracked excavators, the domestic brand Sany Heavy Industry has sold a total of 7967 units, accounting for 13.7%, continuing to maintain the top spot in sales. Caterpillar followed closely behind, with a cumulative sales of 5854 units, accounting for 10.08%, and continued to maintain its position as a foreign brand. Komatsu sold a total of 5347 units in the first half of the year, accounting for 9.21%, ranking third.

　　
Sales of two major models have declined

　　
*In the first half of the year, the market share of domestic brands for excavators weighing over 6 tons decreased from 41.1% in 2013 to 38.6%, while foreign brands increased from 58.9% in the same period of 2013 to 61.4%; Foreign brands of excavators weighing less than or equal to 6 tons account for 56.7%, while domestic brands account for 43.2%, with little change compared to the same period last year.

　　
Among them, in May, excavator sales were 8278 units, a decrease of 30% compared to 11810 units in the same period of 2013, making it one of the months with the most severe decline. The decline in excavator sales has slowed down the hope of industry recovery, and the entire industry will also forge ahead on the road to recovery.

　　
In terms of loaders, in May this year, its sales were 15348 units, an increase of 4 percentage points from the 15% decline in April, reaching a year-on-year decrease of 19%. The sales volume from January to May was 78034 units, a year-on-year decrease of 6%, which is the lowest level since February 2013. The sales of loaders in the first five months were really unsatisfactory, which also raised a dark cloud in the hearts of people who have been looking forward to the recovery of the industry.

　　
From the sales of construction machinery in the first half of the year, it can be truly felt that construction machinery enterprises are struggling to move forward. Although a series of micro stimulus policies such as railway construction, rail transit, affordable housing construction, and shantytown renovation have been continuously promoted, the sales of new machines in the industry are still sluggish due to the large number of construction machinery in the market.

　　
Although the new investment increase and project commencement in the second half of the year will bring some opportunities to the construction machinery industry, the entire industry still faces severe challenges.

　　
Low demand during peak season

　　
According to statistics from the China Construction Machinery Industry Association, in January 2014, the total sales volume of excavators in China was 4533 units, a year-on-year decline of nearly 10%. In February, the excavator industry sold 9410 units, a year-on-year increase of 55.3%. According to a report by Bank of America Merrill Lynch, the sales volume of mining machinery in March decreased by 7.8% year-on-year. The sales of hydraulic excavators by major excavator companies in April were 12478 units, a year-on-year decrease of 2992 units. In May, the sales volume of all tonnage excavator products decreased, with the most significant decline being in the medium excavator (13-30 tons), with a year-on-year decrease of 37%.

　　
According to the sales pattern of previous years, there should have been signs of demand growth in February after the Spring Festival, and gradually enter the peak sales season from March to May. However, this year, on the contrary, there has been a decline in the months that should have been the peak sales season, which has also discounted the expectation of a full year recovery.

　　
At present, the construction machinery industry is still plagued by problems such as inventory accumulation, high market retention, vicious competition among enterprises, zero down payment, and extended payment cycles. However, excessive accounts receivable and overcapacity within the enterprise itself will also limit the industry's recovery efforts. In addition, due to the suspension of some projects and other impacts, the first half of this year was supposed to be the peak season for construction machinery sales, but the production and sales volume fell against the seasonal pattern, resulting in a phenomenon of weak peak season. Currently, many companies are gearing up to seek new profit margins.

　　
According to statistics, the demand for construction machinery in real estate accounts for 55%, the demand for railway infrastructure accounts for about 35%, and the demand for mining industry accounts for about 10%. In the first quarter of this year, the year-on-year growth rate of fixed assets investment was 17.6%, compared with the year-on-year growth rate of 19.6% in the whole year of last year, there was a certain degree of decline. The low market demand is also a contributing factor to the current sluggish sales in the industry.