What should I do with the jump count of the XK3190-A9 weighbridge in Tangzhen Town, Pudong New Area

What should I do with the jump count of the XK3190-A9 weighbridge in Tangzhen Town, Pudong New Area

There are many reasons that can cause overheating of bearings in fully automatic terminal machines, among which the following are common reasons. Let's take a look below. The bearing cover and shaft rub against each other. Due to the fact that the axis of the shaft and the axis of the mechanical equipment it drives are not on the same line during the assembly of the terminal machine, or due to inaccurate processing, the inner circle of the bearing cover is eccentric, causing local friction between the bearing cover and the shaft. Mild cases may cause the bearings to heat up, while severe cases may result in smoke emissions. Large high-speed motors will quickly turn red when rubbed together. At this time, the machine should be stopped immediately, otherwise it will burn out the fully automatic terminal machine. If the belt is too tight or the shaft center of the fully automatic terminal machine is not on the same straight line as the driven machinery, that is, not concentric, it will increase the bearing load and heat up.
Strong anti-corrosion ability: Concrete can resist chemical corrosion, especially suitable for places with chemical erosion and humid areas such as coastal salt fields, and has excellent anti-corrosion ability against salt spray;

○ Lightning protection: Thunderstorm weather often causes damage to components of steel structure truck scales due to lightning strikes, while concrete countertops are non-conductive and can effectively prevent lightning strikes and avoid sensor damage;
○ Rust prevention and maintenance free: Concrete is moisture resistant and oxidation resistant. Unlike steel scales, concrete scales do not rust and do not require annual painting and maintenance, making them environmentally friendly;

Long service life: The concrete material has high strength, good stability, and will not deform during use. It is wear-resistant, pressure resistant, acid resistant, and alkali resistant, similar to bridge structures, with a service life of more than 50 years. However, the service life of steel structure scales is generally only 10-20 years. The service life of concrete platform truck scales is more than three times that of steel structure scales, with one platform supporting three platforms. Save energy consumption, reduce usage costs, and benefit the country and the people;
What should I do with the jump count of the XK3190-A9 weighbridge in Tangzhen Town, Pudong New Area

OLT is used to detect circular containers, especially suitable for standard bottles with straight walls and minimal decoration such as beer bottles, wine bottles, and juice bottles. This technology is also applicable to bottles formed by blow molding and other types of bottles. AGR's OLT and NROLT can be installed on various chain conveyor belts. Therefore, the installation location can be chosen arbitrarily. OLT and NROLT operate independently and do not rely on any other system. Compared with other wall thickness measurement systems, OLT and NROLT have simple settings and can provide continuous and independent monitoring of glass bottle wall thickness. In addition to online detection, the system can also be used for offline screening.
Good quality stability: The concrete countertop has a large self weight, no warping, accurate positioning (small swing), no deformation, and good accuracy stability. The self weight of the concrete platform has a pre pressure on the sensor, which works in the online section to improve the accuracy level of the truck scale;

High strength of bridge structure: using multi-layer threaded steel cloth discs, the overall bridge structure, modular design, standardized and serialized tabletop, easy and flexible lifting;

The difference between reinforced concrete weighing scales (commonly known as cement scales) and fully electronic weighing scales, digital weighing scales, and analog weighing scales lies in the structure of the weighing body. The former is a reinforced concrete structure, while the latter is an all steel structure. The instruments, junction boxes, printers, and sensors used in these scales (commonly known as car scales) are generally the same, with similar working principles and lightning protection facilities. The construction of the scale foundation is the same, and there is no essential difference in functionality. However, the production cycle of cement scales is much longer than that of all steel structures, so if you want to use cement scales as weighing scales, it is important to negotiate with the manufacturer as soon as possible to avoid delaying the use of the weighing scales.

Advantages of cement scale: It fundamentally solves the problems of corrosion of the weighing body, reduced accuracy, and shortened service life caused by rain, sun exposure, acid-base corrosion, and thermal expansion and contraction of the structure during the use of all steel structure weighing scales. It has anti-corrosion ability, structural stability, self weight, accurate positioning, no deformation, and maintenance free
What should I do with the jump count of the XK3190-A9 weighbridge in Tangzhen Town, Pudong New Area

When all the above items are normal, you can start driving. Start the equipment in reverse process order when driving, operating, and parking. Lime mill is generally started in the order of the elevator (or pneumatic conveying equipment), screw conveyor, ball mill, and grinding head feeder in front of the finely ground lime silo. After each device is started, transport it normally before starting the next one. If the mill is equipped with a mechanical dust collector, it should be started first and operated normally before starting other equipment. During operation, it is necessary to regularly check the operation of the mill and check whether the temperature of the mill bearings is too high (should not exceed 6 ℃). If it is too high, check whether the lubricating oil is sufficient, whether the oil is carried to the shaft neck, and whether the cooling water is unobstructed.

Suitable for industries with high requirements for anti-corrosion function, such as public weighing stations, chemical enterprises, port terminals, and refrigeration industry.
Generally, when assembling high-strength bolt connections with large hexagonal heads, the chamfered side of the washer under the bolt head should face the head of the bolt. When installing high-strength bolts, construction personnel must strictly prohibit forcibly inserting the bolts (referring to using a hammer to strike). If it cannot be freely penetrated, the hole should be trimmed with a reamer. After trimming, the diameter of the hole should be less than 1.2 times the diameter of the bolt. When repairing holes, in order to prevent iron filings from falling into the joint of the plate stack, we need to tighten all the bolts around before reaming and check if they are firm, so that the plate stack is tightly attached before proceeding with the operation. One thing to pay close attention to here is that it is strictly prohibited to use gas cutting to expand the hole.