-
E-mail
cshsjx@126.com
-
Phone
13975195381
-
Address
501, Building 5, Xincheng Science and Technology Park, 588 Yuelu Avenue, High tech Zone, Changsha City
Product Categories
- High pressure cleaning machine for power plant condenser cleaning
- Cement roughening high-pressure cleaning machine
- High pressure cleaning machine for removing oxide skin
- Rust removal high-pressure cleaning machine
- Root carving bark peeling high-pressure cleaning machine
- 800 kg ultra-high pressure cleaning machine
- Rust and paint removal high-pressure cleaning machine
- High pressure cold water cleaning machine
- Concrete high-pressure cleaning machine
- Electric high-pressure cleaning machine
Changsha Hongsen Machinery Co., Ltd
Water sandblasting rust removal high-pressure cleaning equipment
NegotiableUpdate on 03/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The high-pressure cleaning equipment for water sandblasting and rust removal belongs to the high-pressure water jet cleaning machine. A water sandblasting nozzle is connected to the high-pressure water gun position, and there is an interface at the position of the water sandblasting nozzle that can be connected to the sandblasting pipe. During the process of high-pressure water spraying outward, a vacuum suction force is formed at the interface of the sandblasting pipe, which sucks the sand in the sand bucket into the nozzle through the sand pipe and mixes with high-pressure water to spray out the nozzle.
Product Details
Water sandblasting rust removal high-pressure cleaning equipmentThe main method is to use a high-pressure cleaning machine combined with a sandblasting kit to treat the paint/rust on the surface of the equipment, which belongs to pure physical cleaning. When in use, only the power and water sources need to be connected to remove rust, paint layers, and heavy oil stains from old factory buildings and equipment.
Equipment parameters
Working pressure 500 bar
Water flow rate 1320L/min
Motor speed 1450rpm
Power load 380V, 50HZ, three-phase four wire system
Motor power 22kw
Size 1300 * 750 * 1100mm
Water sandblasting rust removal high-pressure cleaning equipmentAdvantages of
1. Good cleaning quality, will not damage the substrate of the old factory;
2. Pure water cleaning, automation, simple equipment operation, faster than traditional cleaning methods, and will not cause pollution;
3. Widely applicable, it can clean the shape and structure of messy parts, and can be cleaned in narrow and harsh environments.
The water sandblasting rust removal high-pressure cleaning machine can be applied to remove various coatings, resin layers, pigments, rubber, concrete, plastics, etc. It is widely used in industrial sectors such as old factory renovation, shipbuilding, petroleum, chemical, power, metallurgy, etc.
Similar Product Recommend
