Performance and characteristics of three roll symmetrical plate rolling machine:

The structure of the machine is a three roll symmetrical type. The upper roll performs vertical lifting and lowering motion at the symmetrical position of the center of the two lower rolls, which is obtained through the transmission of a screw and worm. The two lower rolls perform rotational motion, and the output gear of the reducer meshes with the gear of the lower roll to provide torque for the rolled sheet. The disadvantage of this machine is that the end of the board needs to be pre bent with the help of other equipment.

Technical parameters of three roll symmetrical plate rolling machine:

three-roller plate rollFunctions of each component of the three roll symmetrical plate rolling machine
1. Electric motors, motor burnout is the main cause of their damage.
2. The reducer is the most important component of the transmission system. If used improperly, it can produce abnormal noise, which is relatively loud and easily damaged.
3. The contact sliding bearings between the lower roller and the fixed seat, as well as the tilting seat, are commonly known as composite sleeves. Generally, we use copper alloy, which has high wear resistance. However, due to the large amount of working contact, the composite sleeve is still relatively easy to wear during use.
4. The control system of electrical equipment, as a component composed of electrical parts, has visible vulnerability.
5. Screw, worm, turbine, nut, the main driving force of transmission, are also relatively easy to damage due to frequent frictional contact. When leaving the factory, a large amount of butter is added to reduce friction damage. Generally, it takes about a month to remove the cover and add appropriate butter.
6. Bearings, bearing seats, self-aligning bearings, and joint bearings are all vulnerable parts.