Used 1.2-ton dual effect evaporator

Used 1.2-ton dual effect evaporatorUsed 1.2-ton dual effect evaporator

Evaporation is the physical process of transforming liquid into gas. Generally speaking, an evaporator is an object that converts liquid substances into gas. There are a large number of evaporators in industry, among which the evaporator used in refrigeration systems is one of them. The evaporator is an important component among the four major refrigeration parts. Low temperature condensed liquid passes through the evaporator, exchanges heat with the outside air, vaporizes and absorbs heat, achieving the cooling effect. The actual lift of the valve disc from the closed position.. The small cross-sectional area of the flow channel between the inlet end of the valve disc and the sealing surface of the closing component is used to calculate the theoretical displacement without any resistance effect.. The diameter corresponding to the flow channel area.. The cylindrical or conical channel area formed between the sealing surfaces of the valve disc above the valve seat.. The small cross-sectional area of the fluid channel during valve discharge. For a fully actuated valve, the discharge area is equal to the flow channel area; For micro opening valves, the discharge area is equal to the curtain area.. The calculated displacement of an ideal nozzle with a channel cross-sectional area equal to the valve channel area.. The ratio of actual displacement to theoretical displacement. SiC foam ceramic filter This product is mainly used for filtering castings such as nodular iron (nodular cast iron), gray iron (gray cast iron), etc. It can effectively remove large inclusions in the metal melt, absorb small impurities, stabilize the flow, reduce casting defects, and improve casting quality. Product physical and chemical indicators: normal temperature compressive strength, MPa bulk density, g/cm3 product porosity,% operating temperature, ℃ 1.5~2.. 35~. 458~88145~151 Instructions for use: 1. Selection of pore size: ductile iron filtration: generally pore size is 1-15PPI gray iron/copper filtration: generally pore size is 15 or 2PPI. 2. Filtration capacity requirement: The filtration capacity per unit area of the filter generally does not exceed 4kg/cm gray iron: 2kg/cm2. 23. Filtration area requirement: To avoid direct impact of metal liquid on the filter, the cross-section of the sprue where the filter is placed should be appropriately enlarged, generally 2-4 times the cross-section of the normal sprue. The evaporator is mainly composed of two parts: the heating chamber and the evaporation chamber. The heating chamber provides the heat required for evaporation to the liquid, promoting boiling and vaporization of the liquid; The evaporation chamber separates the gas and liquid phases.