Total phosphorus colorimetric tube 0.1-10mg/l

ØProduct parameters

Product Name: Phosphate Colorimetric Tube

Detection range:0.1-0.2-0.5-1-2-5-10mg/l

0-0.5-1-3-5-10-20mg/l

Packaging specifications:PEPlastic tube, aluminum film seal,50branch/box

term of validity:18Month

Ø Product Features

Easy to operate - no need for auxiliary instruments, direct detection, no need for professional laboratories and technicians

Fast and efficient -3-5The analysis of a water sample can be completed in minutes, and all reagents and accessories are built-in without the need for additional preparation

Reliable results - introducing Japanese patented technology, the results are consistent with the national standard method

Convenient to carry -PEPlastic test tube, small in size, light in weight, not easily damaged

Convenient storage - can be stored at room temperature, with an expiration date of18Month

Øinstructions

1Pull out the wire at the tip of the tube

2Drive out the air from the pipe.

3Insert into the tested water quality and stop when about half of the water is sucked in.

4Shake it5-6Next, compare the color with the standard color chart within the specified time.

ØColorimetric cardinstructions

1、 Sampling

Take a certain amount of the liquid to be tested according to the instructions and place it in a test tube

2、 Reaction

Add the reaction reagent, cover the lid, and allow the reaction to fully occur.

3、 Color comparison

AWhen comparing colors, first place the color chart flat in a well lit area

BPlace the colorimetric tube vertically above the colorimetric card (see instructions for details)

CThe testing personnel observe the color through the liquid surface and find the color level that matches the color tone of the liquid in the tube, which is the parameter to be tested

Concentration.

ØApplication scope

In aquaculture, environmental analysis, wastewater discharge and treatment, industrial water use, printing and dyeing and rinsing, chemical and light industry

Industrial and electricalSurface coating treatment and water quality analysis in swimming pools are widely used.

Øprecautions

If the pH value of the tested solution is not below 9, please neutralize it with dilute sulfuric acid in advance