Tianjin Turbine Flow Meter with Package Tax High Precision OEM/ODM OEM/ODM Customization Selection*

Changzhou Chengfeng Flow Meter has been in the industry for 30 years. Chengfeng Flow Meter has a footprint throughout the country, and the sales volume of glass rotor flow meters accounts for one-fifth of the country's total. Such achievements are inseparable from the quality and service of Chengfeng Flow Meter. In fact, an important point is inseparable from technological innovation and the ability to communicate and handle problems with customers. From product selection to production, to the end of its service life, there may be some problems in between, and how to solve these problems requires pre-sales service, after-sales service, and technical service. Pre sales service includes the introduction and selection of our products. At this time, Chengfeng Flow Meter must first understand the customer's situation, provide them with targeted solutions, suitable products, and the right ones. The problem with the flow meter can be directly attributed to Feng Instrument.

The LWGY series turbine flowmeter draws on the technology of flow meters from both domestic and foreign sources. Through optimized design, it has the characteristics of simple structure, lightweight, high accuracy, good reproducibility, sensitive response, and easy installation, maintenance, and use. It is widely used in measuring closed pipelines and does not corrode stainless steel and hard alloys. It also has no impurities such as fibers or particles, and can be used for real liquid calibration of the flowmeter. If matched with display instruments with special functions, it can also perform quantitative control, over limit alarm, etc. It is an ideal instrument for flow measurement and energy saving.

The instrument coefficient given in the verification certificate is applicable to the case where the viscosity of the medium at the working temperature is less than 5 × 10-6m2/s. For liquids larger than 5 × 10-6m2/s, the sensor should be calibrated with real liquid before using the new instrument coefficient.
If users require special types of sensors, they can negotiate and place orders together. When explosion-proof sensors are required, please specify in the order.

1. Basic parameters: see the table below
2. Medium temperature: -20 to+120 ℃
3. Environmental temperature: -20 to+50 ℃
4. Transmission distance: The distance from the sensor to the display instrument can reach 500m
5. Explosion proof grade: Ex m Ⅱ T4

Note: - B is explosion-proof type

Several reasons why you should choose a turbine flowmeter:

1. The measurement signal of the turbine flowmeter can be displayed locally or transmitted remotely as needed.

2. Mechatronics has been achieved, eliminating the need for manual monitoring in daily measurement processes.

3. There are no movable parts, so there is no mechanical wear on the instrument for general measurements.

4. The turbine flowmeter can be put into normal use by regularly replacing the battery (low power consumption) and the parameters of the measured medium.

5. Turbine flowmeter instrument management personnel do not need professional training. Measurement parameters such as flow rate, pressure, and temperature can be directly read from the meter head without conversion.

Product Features

1. High precision, generally up to ± 1% R, ± 0.5% R, and high-precision models up to ± 0.2% R;
2. Good repeatability, short-term repeatability can reach 0.05%~0.2%. It is precisely because of its good repeatability that it can achieve * accuracy through regular calibration or online calibration that flow meters are preferred for trade settlement;
3. Output pulse frequency signal, suitable for total measurement and computer connection, no zero drift, strong resistance;
4. It can obtain high frequency signals (3-4kHz) with strong signal resolution;
5. Wide range, with a medium to large caliber of up to 1:20 and a small caliber of 1:10;
6. Compact and lightweight structure, easy installation and maintenance, and high circulation capacity;
7. Suitable for high voltage measurement, there is no need to open holes on the instrument body, making it easy to make high voltage instruments;
8. There are various types of sensors, which can be designed according to the special needs of users, such as low-temperature, bidirectional, downhole, mixed sand, etc;
9. Can be made into an insertion type, suitable for measuring large diameters, with low pressure loss, low price, can be removed without interruption, and easy installation and maintenance.

Several reasons why you should choose a turbine flowmeter:

1. The measurement signal of the turbine flowmeter can be displayed locally or transmitted remotely as needed.

2. *Integrated mechanical and electrical systems have been achieved, eliminating the need for manual monitoring in daily measurement processes.

3. There are no movable parts, so there is no mechanical wear on the instrument for general measurements.

4. The turbine flowmeter can be put into normal use by regularly replacing the battery (low power consumption) and the parameters of the measured medium.

5. Turbine flowmeter instrument management personnel do not need professional training. Measurement parameters such as flow rate, pressure, and temperature can be directly read from the meter head without conversion.