Tangshan's new 12cm thermosetting silicon polymerized polystyrene board cubic price

Tangshan's new 12cm thermosetting silicon polymerized polystyrene board cubic priceone.Good fire and flame retardant performance

1.Non combustible - the special honeycomb shaped fireproof isolation compartment structure ensures that the product has a fire rating ofAlevel

2.High temperature resistance - the operating temperature can reach1000°C,The melting point can reach1500°Cabove

3.Invisible transformation - does not soften or deform, does not drip or flow, and does not fall off in high temperature and fire

4.Stable and reliable - after overheating, there is almost no loss in physical strength and insulation performance, and it can still be used

5.Long lifespan - This product uses inorganic materials to form a honeycomb shaped isolation cabin with high strength, which has the same lifespan as the building itself and cannot be replaced with insulation layers later on

two.APerformance of non combustible insulation board

bulk densityKg/m3 160—— 200

stress resistanceMPa 0.4—— 0.5

drawingMPa 0.2—— 0.26

thermal conductionW/(m.k) 0.042—— 0.045

three.environment protection

1.No smoke - no smoke produced when burned

2. No toxins - free of harmful substances such as benzene

3. Pollution free - no discharge of three wastes, no harm to the surrounding environment

four. Hydrophobic, breathable, and sound-absorbing

1.Good hydrophobic effect, with a water absorption rate of less than10%

2.The honeycomb structure provides excellent breathability and sound absorption performance for the product

3.Under the premise of maintaining high hydrophobicity, it has good operability to ensure that the board can be bonded with high strength, avoiding delamination or adhesion failure

five. Reasonable product structure

1The board can be cut, sawed, planed, ground, and nailed as needed

2The thin plastering structure can use the original construction method and is easy to operate. Easy to control construction quality

Dry hanging construction method, due to the high strength of the board, can achieve excellent performance with various decorative materials, far more reliable than other insulation materials, such as stone composite, real stone paint composite, etc

3The plastering construction can use single-layer or double-layer mesh structure, or hot-dip galvanized welded mesh structure. The process requirements are flexible and diverse, suitable for different construction site requirements. The performance indicators of the sheet are excellent, and the engineering application is stable and reliable

Product Usage

1Modified polystyrene board can be applied to various types of building insulation and thin plastering systems for interior and exterior walls;

2Base material for integrated decorative insulation board for exterior walls;

3Modified polystyrene board can be applied to the roof of steel structure factory buildings wall freeze Metal glass curtain wall insulation board;

4Modified polystyrene board is suitable for sandwich materials of air conditioning and ventilation panels;

5Insulation boards for building roof insulation systems;

6Modified polystyrene board can be applied to anti-theft doors Fireproof door sandwich panel;

7Automobile train Thermal insulation panels for ships;

The siliceous board produced by our company has the following product characteristics:

1、 Good insulation and energy-saving effect Polyphenylene boardIt continues the advantages of traditional polystyrene board, such as small thermal conductivity and good thermal insulation effect, and has better thermal insulation effect than inorganic thermal insulation mortar and foam glass on the market.

2、 Safety and fire preventionAGrade flame-retardant material Polyphenylene boardOvercoming the shortcomings of traditional polystyrene board, the safety performance is very high, achieving insulation materialAClass fire prevention standards.

3、Polyphenylene boardThe strength is higher than that of rock wool and phenolic board, it does not absorb water, does not fall off, and is easy to construct

4、 System performance* Polyphenylene boardIt is a closed and foamed spherical molecular structure, relatively lightweight, with good dimensional stability, non-toxic, and the system has undergone weather resistance experiments80Sub high temperature - water spray cycle and30After the secondary heating freezing cycle, there were no bubbles, hollowing, or peeling of the decorative layer, and no water seepage cracks were observed. The performance was *.

5、 mature technologyPolyphenylene boardThe construction process is the same as the traditional polystyrene board thin plastering external wall insulation system construction process. The construction process is mature, easy for workers to construct, and safe and reliable, without the instability defects of other new material systems.

1Non combustible: special inorganic cementitious material, fire ratingA2Grade;

2High temperature resistance: The operating temperature can reach1500℃, melting point can reach2500Above ℃;

3No deformation: No softening or deformation, no dripping or flowing, no powdering or shedding in high temperature and fire, and no spread of fire;

4Good stability: After being burned, there is almost no loss in physical strength and insulation performance, and it can still be used;

5Insulation and energy saving: low thermal conductivity,0.040 W/(m·k)following;

6Lightweight: can be controlled within150Kg/M3following;

7High strength: compressive strength up to0.40MPaAbove, the tensile strength is as high as0.10MPaabove;

8Safe, environmentally friendly, and non-toxic: The product does not contain heavy metals, formaldehyde, asbestos, or radiationTangshan's new 12cm thermosetting silicon polymerized polystyrene board cubic price