TUD300 digital ultrasonic flaw detector

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview of Ultrasonic Flaw Detector TUD300 Digital Ultrasonic Flaw Detector is a portable industrial non-destructive testing instrument

Product Details

Overview of Ultrasonic Flaw Detector

TUD300 digital ultrasonic flaw detector is a portable industrial non-destructive testing instrument. It can quickly, conveniently, without damage, and accurately detect various defects (cracks, inclusions, looseness, pores, etc.) inside the workpiece. High reliability, good stability, objective data collection and storage, real-time processing or post-processing of collected data, time-domain, frequency-domain or image analysis of signals, reducing the influence of human factors, improving the reliability and stability of retrieval, and achieving worry free detection of castings, forgings, plates, and welds! Widely used in aerospace, petrochemical, metallurgical power, railway transportation, boiler and pressure vessels, steel structures, mechanical processing and other fields!

Functional characteristics of ultrasonic flaw detector

Peak memory function
Automatic gain adjustment
Quick knob adjustment, easy to operate
Repeated emission rate up to 1KHz
B-type display mode
10 independent flaw detection channels
High sampling rate, fully displaying RF waveform details
The screen refresh rate is as high as 60Hz, with no delay or ghosting, quickly capturing damage waves
All software of the whole machine can be upgraded online through the communication port
Store 300 A-scan graphics and parameters, as well as 64000 thickness values
Can use standard test blocks to automatically generate DAC curves
Equipped with independent dual gate settings and alarm functions
Can switch between single probe, dual probe, and transmission testing modes at will
Probe damping can be switched between 50150400 through menu selection
Has linear suppression function, can suppress screen height by 0% to 80%, step distance: 1%
Locking and unlocking functions with system parameters
Equipped with screen freezing and thawing functions
Has playback function for storing graphics
Capable of printing thickness reports and waveform curves through a serial printer
Capable of communicating with PC and equipped with powerful Windows data processing software
EL high brightness graphic dot matrix display screen, no viewing angle limitation, not affected by temperature and sunlight
Probe automatic calibration function
Two input methods: probe angle and K value
Defect equivalent calculation

Large capacity lithium-ion battery, no memory, continuous working time up to 8 hours

Technical parameters of ultrasonic flaw detector

Scanning range (mm): 2.5-5000mm (steel longitudinal wave)
Pulse shift (μ s): -20 to+3400 μ s
Probe zero point (μ s): 0 μ s to 99.99 μ s, resolution 0.01 μ s
材料声速（m/s）：1000m/s～9999m/s
Output damping (W): 50 | 150 | 400
Frequency range (MHz): Low frequency 0.2-1 | Medium frequency 0.5-4 | High frequency 3-15 | Three selectable levels
Gain adjustment (dB): 0-110dB Adjustment step size: 0.2 | 0.5 | 1 | 2 | 6 | 12 | Locked at 0.0
Vertical linear error: ≤ 3%
Horizontal linear error: ≤ 0.2%
Flaw detection sensitivity margin: ≥ 60dB (2.5MHz 20/Z20-2)
Dynamic range: ≥ 34dB
Dimensions (mm): 240 × 170 × 70mm
Weight (kg): 1.47Kg

Basic configuration of ultrasonic flaw detector

host
Direct probe 2.5MHz20
Tilt probe 5MHz 8 × 9K2
Probe connection cable
3A/9V power adapter
coupling agent
suspenders
lithium battery

Basic configuration of ultrasonic flaw detector

host
Direct probe 2.5MHz20
Tilt probe 5MHz 8 × 9K2
Probe connection cable
3A/9V power adapter
coupling agent
suspenders
lithium battery

Optional accessories for ultrasonic flaw detector

PC communication software
Serial communication cable (9-pin)
Serial printer TPUP-NH
Ultrasonic flaw detector probe
Ultrasonic flaw detector test block