Sprinkler head spray bar host ZP-127 belt lane intelligent spray dust reduction

Product detailed description

Transfer point spray, MiningTransfer point spray, belt conveyor transfer point spray dust suppression device,Spray for mine touch transfer pointUniversal Model:ZPC - 127，ZP - 127，ZPG-127，ZPR-127，ZPC127，ZP127,ZP - 127Z,ZPG127 ZPW127 ZPQW127，ZPC127W，ZPD-7，Zprc 127 zpcy 127 zpf 127 zpfg 127 zpf 127 zph 127 zph- 127 zps- 127Spray at the transfer point of the mine touch automatic watering and dust suppression device, spray at the transfer point of the mine touch automatic watering and dust suppression device,Sprinkler head spray bar host ZP-127 belt lane intelligent spray dust reduction

It is mainly used for coal dust generated during coal transportation in coal chutes, coal bunkers, coal yards and other places under the coal mine, spray water to reduce dust and purify the ambient air,Sprinkler head spray bar host ZP-127 belt lane intelligent spray dust reduction

Product Features

This device can operate in two modes: spraying during startup and spraying during belt transportation of coal flow. When starting up for spraying, it is controlled by the on/off sensor, and when spraying coal flow, it is controlled by the touch sensor. Only a continuous signal can drive the motherboard, thereby providing guidance Spray on specific areas.

Device composition

Composed of a host, electric ball valve, touch sensor, on/off sensor, pyroelectric sensor, etc.

working principle

The device can operate in two working modes: spray when the belt is started and spray when the belt is transporting coal flow.

The belt startup spray is controlled by the start stop sensor. The on-off sensor generates a signal under the induction of the motor current and feeds the signal back to the host, which drives the electric ball valve to open the spray; When the motor stops working and no current passes through, the electric ball valve will automatically close after a delay (adjustable).

The belt conveying coal flow spray is controlled by a touch sensor or a pyroelectric sensor. Only a continuous signal can drive the host. The host drives the electric ball valve to open, thus pointing Spray at specific locations; When there is no material transportation, the electric ball valve is delayed by one Automatically turn off after a set time (adjustable).

Technical Specifications

1Rated voltageAC127V/36V

2Intrinsic safety output voltage:DC12V

3Short circuit current:500mA

4Voltage valve working voltage:DC12V

5Voltage valve water pressure range:0Mpa-7Mpa

6Working mode: continuous

7Main control box dimensions:400×220×160（mm）

8Weight:18kg