Sj500/sj2100 surface roughness measuring instrument

Sj500/sj2100 surface roughness tester

technical parameter:

Xaxis(Drive Department)

Measurement range: 50mm

Resolution: 0.05μm

Detection method: Linear encoder

Drive speed: 0 - 20mm/s

Measurement speed: 0.02 - 5mm/s

Movement direction: backward

Straightness: 0.2μm / 50mm

Positioning: ± 1.5 ° (tilt angle, DAT function) 30mm (up/down) detector

Range/Resolution: 800μm / 0.01μm, 80μm / 0.001μm,8μm / 0.0001μm

Detection method: trackless/trackless measurement

Force measurement: 4mN or 0.75mN (low load type)

Needle tip: Diamond, 90o/5 μ mR (60o/2 μ mR: low force type)

Curvature radius of guide head: 40mm

Detection method: Differential inductance controller

Display: 7.5 "TFT color display with backlight

Printer: Built in thermal printer

Magnification: Horizontal: X10 to X50000, automatic vertical: X0.5 to X10000, control of automatic drive device: A high-precision, high-performance, pocket sized surface roughness measuring instrument with a dedicated controller operated manually through a joystick. It is easy to operate and displays at a glance.

SJ-500Surface roughness measuring instrumentcharacteristic

The display is clear at a glance and the operation is simple.

Equipped with a high visibility 7.5-inch TFT LCD screen. Color icon display, touch panel, clearer display, simpler operation Easy positioning using the dedicated controller's built-in joystick for easy and fast positioning. The measurement on the inside of the small hole requires fine-tuning of the small measuring head. Using a manual handle for easy fine-tuning Easily set measurement conditions for surface roughness. By utilizing the equipped simple input function, input can be made according to the drawing instruction symbols of ISO/JIS roughness standards. The previously cumbersome measurement condition settings can now be easily inputted by selecting the surface roughness drawing command symbol directly from the menu.