Siemens analog input module with 4-20mA encoder

Multi skilled at measuring angles, lengths, and speeds

Value digital encoder, built-in signal conversion, 4-20mA analog current and RS485 output, convenient for connecting various devices.

EasyPro software settings are versatile and multifunctional, directly corresponding to single turn and multi turn angle, multi turn length, and rotation and translation speed measurements.

The corresponding values of 4mA and 20mA can be set and fine tuned arbitrarily; Direction setting; The external positioning line is set to a preset position, easy to install, and does not require changing.

Internal value dial, clock style gear set multi turn counting, fully digital counting, 1/65536

High linearity, no temperature or mechanical influence on the signal, and minimal zero drift of signal interference.

characteristic parameters

Working voltage: 10... 30Vdc polarity protection

Current consumption:<60mA (24Vdc) No load

Output signal: 4-20mA, RS485, (Easypro free protocol), adjustable length, angle, speed application output, optional Modbus output

Linear resolution: 1/65536FS

Continuous turns: 1~4096 turns

Repetition accuracy: repeatability ± 2BIT (actual accuracy is related to installation accuracy and axis concentricity)

EasyPro: RS485 signal to RS232 or USB connection to computer, EasyPro intelligent settings available

Signal adjustment: can fine tune 4mA output and 20mA output; Directional setting; Preset position, external setting, such as external zero setting

Working temperature: -25~80 ℃ Temperature range during programming: 0 ℃~70 ℃

Storage temperature: -40~80 ℃

Protection level: IP67 shell, IP65 shaft

Vibration impact: 20g, 10-2000Hz; 100g，6ms

Allowable speed: 2400 revolutions per minute

Connecting cable: 1-meter shielded cable radially out (other forms can be ordered)

Appearance features: Metal shell, sealed double bearing structure

Easypro software interface