- Phone
-
Address
1015 Mingliu Future Building, South Fourth Ring Road, Fengtai District, Beijing
Product Categories
Beijing Huayi Tongtai Technology Co., Ltd
Sherwood M410 basic flame photometer
NegotiableUpdate on 04/23
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The M410 basic flame photometer uses low-temperature flames to directly measure bases and alkaline earth metals such as sodium, potassium, and calcium.
Product Details
Beijing Huayi Tongtai Technology Co., Ltd. specializes in the sales of imported analytical and testing instruments. We provide a wide range of products, competitive prices, and excellent after-sales service.
The M410 basic flame photometer uses low-temperature flames to directly measure bases and alkaline earth metals such as sodium, potassium, and calcium.
Sherwood, UKM410 basic flame photometerInstrument Introduction:
The M410 basic flame photometer uses low-temperature flames to directly measure bases and alkaline earth metals such as sodium, potassium, and calcium.
The sample inlet of M410 basic model is located at the front of the machine, and the filter replacement is very easy - there is no need to disassemble the machine The safety equipment includes a gas solenoid valve that automatically closes when the flame suddenly goes out, and an insulated smoke hood.
M410 basic standard configuration: main unit, built-in secondary gas regulating valve, sodium/potassium/calcium filter, air compressor, intake filter, 6x100 milliliters of 1000ppm sodium/potassium/calcium standard solution each, 2 meters of gas and air pipelines each, and all necessary connectors.
Sherwood, UKM410 basic flame photometer instrumentMain features:
A flame photometer uses low-temperature flames to directly measure bases and alkaline earth metals such as sodium, potassium, and calcium.
A flame photometer uses low-temperature flames to directly measure bases and alkaline earth metals such as sodium, potassium, and calcium.
The sample inlet is located at the front of the machine, and the filter replacement is very easy - there is no need to disassemble the machine Safety equipment includes automatic closing of intake valves when flames suddenly extinguish, as well as insulated smoke hoods The photometer is equipped with a built-in secondary gas regulating valve, sodium/potassium/calcium filters, 500ml of 1000ppm sodium/potassium/calcium standard solution each, 2-meter gas and air pipelines, and all necessary connectors.
Can simultaneously measure three elements: Na, K, and Ca
M410 basic flame photometry instrumentApplication areas:
Beverages, chemical manufacturing, clinical testing, agriculture, food, pharmaceuticals, mineral extraction, oil industry, petroleum, chemical, soil analysis, etc
M410 basic flame photometry instrumentApplication areas:
Beverages, chemical manufacturing, clinical testing, agriculture, food, pharmaceuticals, mineral extraction, oil industry, petroleum, chemical, soil analysis, etc
Sherwood, UKM410 basic flame photometer instrumentTechnical parameters:
Range: 0~1999, Na,Ka, Ca
Sensitivity: Na,Ka<>
Interference value:<>at the same concentration
Linear value: better than 2%, Na,Ka=3ppm
Drift value: For 10ppm Na, preheating for 30 minutes, zero drift is less than 2% per hour
Repeatability: For 10ppm Na, Ka, The repeatability of measuring 20 samples of the same quantity is better than 1%
Detection limit: for Na, Ka<>
Stable time: 20 seconds after sample filling
Injection rate: 2-6 milliliters per second
Gas: propane, butane or their mixture, 30psi intake pressure
Recorder output: 100mV
Display: 3 and a half LED
Similar Product Recommend
