SH116 Lubricating grease anti water spray tester

NegotiableUpdate on 12/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SH116 Lubricating Grease Resistance to Water Splashing Performance Tester is used to determine the resistance of lubricating grease to water splashing according to the SH/T0109-92 and ASTMD1264 "Determination of Lubricating Grease Resistance to Water Splashing Performance" standards. It is a new product used to evaluate the resistance of lubricating grease to being washed out of the bearing by water under specified experimental conditions at 38 ℃ and 79 ℃. Performance features: 1. The water bath temperature is input to the temperature controller through a PT100 sensor (resistance temperature measurement package) and processed by the internal calculation circuit of the temperature controller to obtain a control signal, which is output to complete heating control. 6. Temperature control accuracy of the sink: ± 2 ℃ 7. Power: 600W 8. Bearing specification: 204 type 9 Dimensions: 300 × 265 × 425mm

Product Details

SH116Lubricating grease water repellent performance tester according toSH/T0109-92TheASTMD1264The standard for determining the resistance of lubricating grease to water immersion is used to determine the resistance of lubricating grease to water immersion,Under specified experimental conditions38℃ and79A new product that evaluates the ability of lubricating grease to resist being washed out of bearings by water during the ℃ test.

Performance characteristics:

1The temperature of the water bath passes throughPT100The sensor (resistance temperature measurement package) is input to the temperature controller and processed by the internal calculation circuit of the temperature controller to obtain a control signal. This control signal is output to complete the heating control

2The amount of water spray can be directly controlled by circulating pumps, high flow valves, nozzles, etc

3Using electric heating rods for fast heating speed

4Choose ball bearings according to standards, and the timer can be accurate to0.1S
Technical Specifications:

1Sink capacity:≥750ml

2Temperature control range of sink: room temperature~100℃, continuously adjustable

3 Bearing speed accuracy:600±30r/min

4 Water jet accuracy:5±0.5ml/s(Two valve regulation)

5 thermometer: 0～100℃ Grid value1℃

6Temperature control accuracy of sink: ±2℃

7 Power:600W

8 Bearing specifications: 204type

9External dimensions:300×265×425mm