SC-500 Sand and Dust Prevention Test Chamber

SC-500 Sand and Dust Prevention Test Chamber

1Sand and dust prevention test chamberProduct Usage: Suitable for conducting dust and dust resistance tests on various automotive components, including car lights, instruments, electrical dust covers, steering systems, door locks, etc., to verify the sealing quality of the product.
2、 Structural features:
1. Material of the casing: high-quality carbon steel plate, surface treated with phosphating and electrostatic spraying, SUS304 stainless steel line treated with hairline;
2. Inner liner material: imported SUS stainless steel light plate;
3. Box door: Tempered glass door, convenient for observing the condition of the tested sample inside the test box;
4. The bottom adopts high-quality fixed PU movable wheels;
5. There is a dust replacement device at the bottom of the test chamber;
3、 System structure:
1. Control system: The programmable logic controller (PLC) is used to control the time and sequence of dust, vibration, and vacuum systems;
2. Execution components: Schneider AC contactors, switches, buttons; Fuji intermediate relay; Panasonic dustproof socket;
3. Dust preheating system: stainless steel mica heating sleeve, safe and stable heat; Equipped with timed heating control; Vacuum system: equipped with pressure gauge, air filter, pressure regulating triple piece, connecting pipe (vacuum pump is separately equipped, please specify when ordering);
4. Test piece power socket: dustproof socket AC220V 16A;
5. Circulating fan: low-noise motor, multi blade centrifugal fan;
6. Protection system; Equipped with leakage, short circuit, overheating, motor overheating, overcurrent protection/controller power-off memory protection;
4Sand and dust prevention test chamberTechnical parameters
1. The nominal spacing between metal mesh is 50um, and the nominal spacing between wires is 70 μ m;
2. Airflow velocity: ≤ 2m/s (standard type) or ≥ 2m/s (specified at the time of ordering);
3. Choose any time setting for continuous or periodic blowing;
4. The dosage is 2kg~4kg/m3;
5. Experimental dust: dry *, Portland cement, smoke ash, etc;
6. The vibration time can be adjusted from 0 to 9999M;
7. Fan cycle time: 0-9999M;
8. Standard configuration: The sand and dust test box is equipped with 2 test racks, each weighing 2kg;
9. Power requirements: AC380 (± 10%) V/50HZ three-phase five wire;
5Sand and dust prevention test chamberProduct model and specifications
1. Model: SC-500 Internal dimensions: D × W × H800 × 800 × 800: mm External dimensions: D × W × H1030 × 920 × 1660: m
2. Model: SC-800 Internal dimensions: D × W × H800 × 1000 × 1000: mm External dimensions: D × W × H1030 × 1120 × 1860: mm
3. Model: SC-010 Internal dimensions: D × W × H1000 × 1000 × 1000: mm External dimensions: D × W × H1230 × 1120 × 1860: mm
4. Model: SC-015 Internal dimensions: D × W × H1000 × 1000 × 1500: mm External dimensions: D × W × H1230 × 1620 × 1860: mm
6、 Compliant with standards:
Meet the requirements of GB2423, GB4706, GB4208, and DIN for the protection level test of household appliances, low-voltage appliances, automotive, and motorcycle parts casings. Cannot meet the sand and dust test with wind source in GJB150.
7SC-500 Sand and Dust Prevention Test ChamberUsage conditions:
1. Environmental temperature: 5 ℃ to+28 ℃ (average temperature within 24 hours ≤ 28 ℃);
2. Environmental humidity: ≤ 85%;
Free home delivery and installation and debugging instructions (until the customer's employees operate independently and are satisfied)