Rubber insulation board manufacturer

Rubber insulation board manufacturer

The advantages of rubber insulation pipes are:
Advantage 1: Easy to install;
Due to the use of plastic material, the rubber insulation pipe has good elasticity and is very soft, making it very convenient for us to use and install. If it is installed in the pipeline, the pipe can be directly installed after being fitted. For some complex structures such as water and elbows that we use, they can be cut according to the needs. Good elasticity can make the entire component very tight after installation, providing insulation.
Advantage 2: Low thermal conductivity;
This is mainly attributed to its own structure, the closed bubble structure. Make it less likely to absorb water or absorb very little water, which can effectively prevent water and gaseous water from "escaping" from the pipe wall.
Advantage three; Smooth and flat;
Made of rubber, its surface is very smooth and flat, so there is no need to add any insulation layer or protective layer, effectively improving construction efficiency, saving time and effort, while ensuring overall aesthetics. If maintenance is required, it can be easily cut off, and the remaining materials can still be used.
Advantage 4: Green and environmentally friendly;
When rubber and plastic insulation pipes are used, there will be no waste water and other pollutants. Moreover, they are anti-aging and are green and environmentally friendly insulation materials used by Zuihao.
Rubber insulation pipes have a smooth and beautiful appearance, and are easy to install. For complex components such as valves, tees, elbows, blind spots, and corners in buildings, the boards can be easily cut and wrapped in different shapes for bonding, ensuring the tightness of the entire insulation system and thus guaranteeing insulation performance. At the same time, the rubber insulation pipe has a smooth and flat surface with rubber, as well as an internal structure of the material, ensuring excellent performance of the rubber insulation pipe. No additional vapor barrier or protective layer is required during construction, reducing the trouble during construction and ensuring a beautiful and smooth appearance.
Beautiful and environmentally friendly rubber insulation pipe
The flame retardant performance of rubber insulation pipes is very good. It also contains a large amount of flame retardant and smoke reducing materials, and the smoke concentration generated during combustion is very low. In addition, rubber insulation pipes do not melt or produce molten materials when exposed to fire. At the same time, this material also has the characteristic of automatic extinguishing, ensuring the safety and reliability of insulation objects. The use of good insulation measures and insulation materials in construction and industry can significantly reduce production energy consumption and costs, improve the environment, and achieve twice the result with half the effort.
The main characteristics of rubber sheet are that it has a closed foam structure, low thermal conductivity, excellent insulation effect, and can save energy consumption. Its closed gas structure and dense skin make it difficult for water vapor to pass through, and it has the characteristic of low water absorption rate. Rubber sheets are highly flexible, making construction and installation extremely convenient, saving labor and materials. It has an elegant and clean appearance, a wide temperature range (-40 ℃ to -120 ℃), good weather resistance, and is durable and practical. The flame-retardant formula of rubber sheet * gives the material excellent waterproof and flame-retardant effects.

The excellent comprehensive performance of rubber sheet materials has been widely used in industries such as construction, textiles, pharmaceuticals, chemicals, petroleum, metallurgy, shipbuilding, etc. Rubber sheets are widely used in the cooling, condensation prevention, and insulation of water and steam pipelines in air conditioning systems to prevent heat loss, thus achieving ideal results.
The thermal conductivity of rubber sheet is low. When its average humidity is 0 ℃, the thermal conductivity of this material is 0.034W/MK, while its surface heat release coefficient is high. Therefore, under the same external conditions, using a material thickness that is more than half thinner than other insulation materials can still achieve the same insulation effect, thus saving space above the floor ceiling, saving investment, and increasing space.
Rubber insulation board manufacturerThe closed bubble structure of the rubber sheet also makes it difficult for water vapor from the outside air to penetrate into the material, so it has excellent resistance to water vapor penetration. Water vapor cannot penetrate through the material of the rubber sheet, and the surface of the rubber sheet material also has a certain degree of hydrophobicity. So rubber sheet is a good waterproof material.
Rubber and plastic sheets have excellent flame retardant properties, and the material itself contains a large amount of flame retardant and smoke reducing components. The concentration of smoke generated during combustion is extremely low, and it does not melt when exposed to fire, nor does it drip into the ignition ball. The material has self extinguishing characteristics. According to the standard, rubber sheet belongs to Class B1 products and is a building material with a high fire rating.
Rubber sheet (1 meter wide)
Thickness 10mm 13 mm 15mm 18 20mm 23 mm 25mm 28 mm 30mm
米/件 20m 20 m 20m 10 10m 10 m 10m 10 m 10m
The thickness of the board is 13mm, 18mm, 23mm, and 28mm, and can be customized for production in large quantities.
Technical Specifications
Performance indicators of project units
Level 0, Level I, Level II
Plate tube plate tube
Apparent density Kg/m3 65-70 60-65 60-65
Combustion Performance - Level 0, Level B1, Level B2
Oxygen index ≥ 40 Oxygen index ≥ 32 Oxygen index 28 ≥ 28
Smoke density ≤ 70 Smoke density (SDR) ≤ 75 Smoke density (SDR) - ≤ 75
thermal conductivity
(Average temperature in Celsius) W/m.k ≤ 0.034
Moisture permeability coefficient G/(m.spa) ≤ 10 × 10-10 ≤ 7 × 10-10 ≤ 4.5 × 10-10
Moisture resistance factor - ≤ 10 × 10-10 ≤ 7 × 10-10 ≤ 4.5 × 10-10
Vacuum water absorption rate% ≤ 10
Dimensional stability performance
（105+-3，7d） % ≤10
Tear strength N/cm ≥ 3.0
Compression rebound rate
Compression rate 50% compression time 72h% ≤ 70
Ozone resistance
(Ozone partial pressure 202Pa 200h) - No cracking
Aging resistance (150h) - slightly wrinkled, no cracks, no pinholes, unchanged